Sanitation & Cleaning

Sanipro Rinse 250ml Sanitizer

Sanipro Rinse 250ml Sanitizer

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume250 ml / 8.5 fl.oz

€11
Volume discount! €10 per piece when you buy 2 or more
Sanipro Rinse 1000ml Sanitizer

Sanipro Rinse 1000ml Sanitizer

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume1000 ml / 34 fl.oz

€28
Volume discount! €24 per piece when you buy 2 or more
Sanipro Rinse 5000ml Sanitizer

Sanipro Rinse 5000ml Sanitizer

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume5000 ml / 169 fl.oz

€74
Volume discount! €51 per piece when you buy 2 or more
Chemipro-Oxi Sanitizer

Chemipro-Oxi Sanitizer

Chemipro-Oxi Sanitizer

€7,3
Coobra VWP Cleaner & Sanitizer 100g

Coobra VWP Cleaner & Sanitizer 100g

Coobra VWP can be used to clean and sanitize all types of home brewing equipment. 100g is enough for up to 350L. Needs to be rinsed off with water after use. Alternative to cleaners such as PBW.

€4,2
VWP Cleaner & Sanitizer 400g

VWP Cleaner & Sanitizer 400g

VWP can be used to clean and sanitize all types of home brewing equipment. 400g is enough for up to 1400L. Needs to be rinsed off with water after use. Alternative to cleaners such as PBW.This sterliser comes in a sturdy tub and contains the steriliser in a white powder, its as simple as adding a level teaspoon to your primary fermentation bucket and filling it with some water, add all your equipment to the bucket and leave to sit in the solution for approx 15 minutes, rinse and that's it ready for use

€10
VWP Cleaner & Sanitizer 100g

VWP Cleaner & Sanitizer 100g

VWP can be used to clean and sanitize all types of home brewing equipment. 100g is enough for up to 350L. Needs to be rinsed off with water after use. Alternative to cleaners such as PBW.This sterliser comes in a sturdy tub and contains the steriliser in a white powder, its as simple as adding a level teaspoon to your primary fermentation bucket and filling it with some water, add all your equipment to the bucket and leave to sit in the solution for approx 15 minutes, rinse and that's it ready for use

€3,6
Star San HB 118ml

Star San HB 118ml

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

€11
Temporarily out of stock
View product
Star San HB 236ml

Star San HB 236ml

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

€16
Temporarily out of stock
View product
Star San HB 473ml Sanitizer

Star San HB 473ml Sanitizer

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

€26
Temporarily out of stock
View product
Star San HB 946ml

Star San HB 946ml

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

€35
Temporarily out of stock
View product
Grainfather High Performance Cleaner 500g

Grainfather High Performance Cleaner 500g

This High Performance Cleaner is specially formulated to be used with the Grainfather. It removes hard to clean proteins from your Grainfather without the need for tedious scrubbing. Perfect for cleaning hard to reach places such as the counter flow wort chiller, pipes and pumps.This is suitable for soft (copper) and hard (stainless steel) metals which not many other cleaners do. It is important you use this to clean your Grainfather as other cleaners may, over time, damage your system.Use- Add 2 Tbsp of cleaner to 15 L of water at 60°C to your Grainfather. - Attach the counter flow wort chiller and recirculate the cleaner for 15 minutes. - Remove the counter flow wort chiller and attach the recirculation pipe and recirculate for another 5 minutes. - Rinse all surfaces that came in contact with the cleaner thoroughly with winter. - Gently scrub the inside of the boiler with a soft bristle brush to remove left over stains. Rinse and drain.

€14
Volume discount! €13 per piece when you buy 2 or more
PBW Cleaning Agent 120g

PBW Cleaning Agent 120g

PBW (Powdered Brewery Wash) is a buffered alkaline cleaner with active oxygen and exemplary cleaning capacity. It is safe to use and harms neither you, the environment nor the equipment. PBW is at least as effective as caustic soda but is completely free of its negative features. PBW is used by breweries for CIP (Cleaning in Place) and is also very popular among home-brewers. Recommended dosagefor home-brewers is 2 oz per 5 gallons, or 57 g per 19 litres, or 0.3%. This corresponds to 2 tbsp per 10 litres. Breweries usually use 1-2 oz per gallon, or 0.75-1.5%, depending on degree of contamination. For lighter cleaning a lower concentration will suffice. Recommended contact timeis 30 minutes for mashing, sparging and boiling vessels and barrels, and 5-10 minutes for hoses. Longer contact time than three hours can be dangerous to the equipment and especially plastic details which are much more sensitive than steel and glass. Recommended temperature:PBW can be used in a cold solution, but is more effective at higher temperatures. However, do not exceed 70 °C. Rinse with water afterwards.

€6,4
Temporarily out of stock
View product
PBW Cleaning Agent 450g

PBW Cleaning Agent 450g

PBW (Powdered Brewery Wash) is a buffered alkaline cleaner with active oxygen and exemplary cleaning capacity. It is safe to use and harms neither you, the environment nor the equipment. PBW is at least as effective as caustic soda but is completely free of its negative features. PBW is used by breweries for CIP (Cleaning in Place) and is also very popular among home-brewers. Recommended dosage for home-brewers is 2 oz per 5 gallons, or 57 g per 19 litres, or 0.3%. This corresponds to 2 tbsp per 10 litres. Breweries usually use 1-2 oz per gallon, or 0.75-1.5%, depending on degree of contamination. For lighter cleaning a lower concentration will suffice. Recommended contact time is 30 minutes for mashing, sparging and boiling vessels and barrels, and 5-10 minutes for hoses. Longer contact time than three hours can be dangerous to the equipment and especially plastic details which are much more sensitive than steel and glass. Recommended temperature: PBW can be used in a cold solution, but is more effective at higher temperatures. However, do not exceed 70 °C. Rinse with water afterwards.

€20
PBW Cleaning Agent 1,8kg

PBW Cleaning Agent 1,8kg

PBW (Powdered Brewery Wash) is a buffered alkaline cleaner with active oxygen and exemplary cleaning capacity. It is safe to use and harms neither you, the environment nor the equipment. PBW is at least as effective as caustic soda but is completely free of its negative features. PBW is used by breweries for CIP (Cleaning in Place) and is also very popular among home-brewers. Recommended dosage for home-brewers is 2 oz per 5 gallons, or 57 g per 19 litres, or 0.3%. This corresponds to 2 tbsp per 10 litres. Breweries usually use 1-2 oz per gallon, or 0.75-1.5%, depending on degree of contamination. For lighter cleaning a lower concentration will suffice. Recommended contact time is 30 minutes for mashing, sparging and boiling vessels and barrels, and 5-10 minutes for hoses. Longer contact time than three hours can be dangerous to the equipment and especially plastic details which are much more sensitive than steel and glass. Recommended temperature: PBW can be used in a cold solution, but is more effective at higher temperatures. However, do not exceed 70 °C. Rinse with water afterwards.

€42
Temporarily out of stock
View product
PBW Cleaning Agent 3,6kg

PBW Cleaning Agent 3,6kg

PBW (Powdered Brewery Wash) is a buffered alkaline cleaner with active oxygen and exemplary cleaning capacity. It is safe to use and harms neither you, the environment nor the equipment. PBW is at least as effective as caustic soda but is completely free of its negative features. PBW is used by breweries for CIP (Cleaning in Place) and is also very popular among home-brewers. Recommended dosage for home-brewers is 2 oz per 5 gallons, or 57 g per 19 litres, or 0.3%. This corresponds to 2 tbsp per 10 litres. Breweries usually use 1-2 oz per gallon, or 0.75-1.5%, depending on degree of contamination. For lighter cleaning a lower concentration will suffice. Recommended contact time is 30 minutes for mashing, sparging and boiling vessels and barrels, and 5-10 minutes for hoses. Longer contact time than three hours can be dangerous to the equipment and especially plastic details which are much more sensitive than steel and glass. Recommended temperature: PBW can be used in a cold solution, but is more effective at higher temperatures. However, do not exceed 70 °C. Rinse with water afterwards.

€74
Bottle Brush for wine bottles 45cm

Bottle Brush for wine bottles 45cm

Bottle Brush for wine bottles 45cm

€2,7
Hygiene Plug with brush for tap

Hygiene Plug with brush for tap

Hygiene Plug with brush for tap

€3,2
Easy Drainer 32/50+ Bottles

Easy Drainer 32/50+ Bottles

Stackable bottle stand / drying stand with up to 25/16 bottles per layer. can be expanded and stacked in up to 7 layers. Made in food-approved plastic.

€28
Easy Washer Flaskspolare 35 cm

Easy Washer Flaskspolare 35 cm

Smooth bottle washer with nozzle and quick coupler for cleaning eg in bottles, barrels and vessels that are otherwise difficult to clean thoroughly. The model is multijet so it sprays out the water in high pressure in different directions for efficient cleaning. With quick coupling switch on tap. Hose with coupling, handle and nozzle included. Nozzle can be switched so you can have several different sizes of the nozzle to the same handle. Nozzle is included.

€44
€45
DEAL

Better Brew Bottle Brush

Better Brew Bottle Brush

€2,7
Better Brew Bottle Brush 46cm Straight

Better Brew Bottle Brush 46cm Straight

Better Brew Bottle Brush 46cm Straight. Food grade. Colour may vary.

€3,6
Better Brew Barrel Brush 91cm Extra Long

Better Brew Barrel Brush 91cm Extra Long

Better Brew Barrel Brush 91cm Extra Long. Food grade materials. Colours may vary.

€10
Temporarily out of stock
View product

Better Brew Bottle Brush 46cm Cranked

Better Brew Bottle Brush 46cm Cranked. Food grade. Colour may vary.

€4,5