Equipment

The shrink cap gives a professional impression to the wine bottle. It tightens around the neck of the bottle when you dip it in boiling water, and thus requires no tool. Each package contains 30 shrink caps.

Pump siphon Gasket for 33 & 44cm (spare part). Hard plastic, fits 23mm pipe.

Butterfly Tap Medium Conical 9,5–11,5–13mm

Complete kit for carbonation and bottling from 18L Cornelius keg with ball connection to iTap X. Contains everything in the picture, iTap X counter pressure filler for crown bottles, 18L Cornelius keg (used), Regulator & Carbonation cartridge for soda stream as well as all connections, adapters and hose (hose comes in a full length that can be cut in suitable lengths). Includes a PET adapter with quick connection so you can easily connect and disconnect the gas.See picture for connection and installation instructions.

Fluidfit HUT1/4-1/4G T-connector Female 1/4" (6,35mm). Beer or Gas. pushfit

A complete 4L PET minikeg kit Oxebar with gas bottle included.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles. Note: No round edges on the labels.Specification- 63,5x38,1 mm (each label)- 21 labels per A4 sheet- Total 100 pcs A4 sheet- Total 2100 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Valve Beer/Liquid Ball-lock for Cornelius keg.

Crown Caps 75-pack Green 26mm

Fluidfit HUT5/16-5/16G T-connector Female 5/16" (8mm). Beer or Gas. pushfit

Brewly Spare Part for Corker Twin Lever. 1pc. NOTE: Corker is not included.

Quick Swivel Connector from 1/2" NPT Female to 1/4" (6.35 mm) pushfit / duotight. Made of stainless steel with a robust silicone grip all around so you can use the nut without tools.

Quick Swivel Connector from 1/2" NPT Female to 1/2" (13 mm) hose barb. Made of stainless steel with a robust silicone grip all around so you can use the nut without tools. Fits most pumps with 1/2" thread.The KegLand Stainless Steel Quick Connectors in 1/2" Female NPT come with a heavy duty silicone grip guard allowing comfortable and quick tool-free operation. These are ideal for the BrewZilla, DigiBoil ball valves and any and all half inch fittings like the 25 watt magnetically driven pumps. Features:- Stainless steel and silicone construction- High temp silicone grip provides a cool touch even with hot liquids!- Ribbed grips allow quick comfortable tool-free operation- Silicone o-ring seal is retained for perfect positioning but is easily cleaned or replaced- Fits all male 1/2" NPT and BSP fittings as it is a parallel thread.- 13mm Stainless Steel Barb tail with 10mm ID Bore

Heavy duty brewing gloves, ideal for cleaning around the brewery or even the home. Seriously long for getting those arms deep into Kegmenters, Fermentasaurus' and those Large and In Charge Brew Pots. Heavy Duty Vulcanized Latex Brewing Gloves - 55cm LongThese heavy duty brewing gloves are made from vulcanized latex, ideal for cleaning around the brewery or even the home. Seriously long for getting those arms deep into Kegmenters, Fermentasaurus' and those Large and In Charge Brew Pots.Tough chemical resistant material provides good protection to your hands during clean-up and sanitary handling of equipment.  55cm long so will also protect the forearm when reaching into harsh cleaning chemicals.

FermZilla Heating Wrap Belt 30W- With Velcro Strap (30watts) Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty. Punching in at an ample 30 watts, this heating wrap belt is great when paired with insulation and a temperature controller box to dial in that optimum fermentation profile. 30W220-240V Dimensions:1000mm x 250mm

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors.1/2" (12.7mm) outer diameter och 3/8" (9,5mm) inner diameter.Price per meter. If more than one meter is ordered, its delivered in one piece.

This kit has been designed for simplicity and ease of putting together. If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job. The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure. This BlowTie unit can be easily dissassembled for cleaning using a phillips head screw driver. Designed to suit 8mm (5/16") Evabarrier Tubing.  It's compatible with both the 4mm ID Tubing here or 5mm ID here. Specifications:1. Suits pressures 0-60psi (but with different guages the unit can go above 100psi)2. Made from food grade acetal3. Stainless screws4. 8mm (5/16") push on both sides

NukaTap Mini & FC (Gen2) Self Closing Tap Spring. This Nukatap mini & Nukatap FC spring is designed to suit all Nukatap Mini taps and also the Nukatap FC tap.  This custom made 304 grade spring size is designed specifically to ensure your Nukatap stays closed when it should. Simple let go of the tap handle and the tap will snap shut and prevent accidentally leaving the tap on and emptying the keg onto the floor. This handy inexpensive devices suits all Nukatap Mini and Nukatap FC taps and shank combinations.

Dual Pressure CO2 regulator MK4. Precise regulator of high quality. These are 2 MK4 regulators that are connected together, so that you get 2 outputs with individual pressure adjustment.  Thread type for connecting CO2 bottle: Type 30 (Australia/NZ), compatible with Nordic CO2 standard DIN-477 No. 6 / W 21.8 x 1/14" The outputs have 1/4" MFL threads, and it comes with 2 DuoTight (pushfit) adapters for 8mm (5/16") hose.  Recommended range of use: 0 to 3.5 bar

Fluidfit® HCF-UNF 3/8" push-fit connection with female 1/2" BSPP thread.

29 mm crown caps (crown corks) for champagne and geuze bottles.

With this stainless steel bottlefiller, you can pour beer and other beverages directly into bottles from kegs and minimize exposure to oxygen by the use of foaming and flushing the bottle with CO2 first. Fits most types of bottles.Works best with cold liquid and with a pressure between 0.6 - 1.1 bar.For cleaning, use an alkaline cleaner (VWP, PBW or Chemipro OXI) and flush the bottle filler according to CIP (Clean In Place), then rinse through the back pressure filler with water.Then use a disinfectant (Sanipro or Star San) before use.Connect the CO2 hose from the regulator on one side and the beer hose on the other side.Barbs: 1/4" (ca 6,5mm)Straight Foam RElease valve: 5/16" (8mm)Length: ca 40.0cmWidth: ca 14.5cm

The pluto beer guns have become an iconic beer dispensing tool used throughout the industry. Whether it be in your garage drinks fridge or on the go with picnic set ups.Now with a new and improved design!Fits 1/4" pushfit/duotight/JG (not included) or 4-6,5mm inner diameter hose.This model is the Black Nylon / Stainless version, it comes with a barb that can suit 4mm to 6mm beer line. Extremely tough nylon coating, we've done a lot of testing with this model. Running it over in the ute did not stop the from pouring an icy cold one!Key Features:- Reinforced Black Nylon Coated- Adjustable tension spring- 100% detachable for thorough cleaning of potential blockages.Note: Only Pluto Gun is included.

Hose Clam Butterfly Stainless Steel, adjustable 21-38mm with plastic butterfly thumb screw. Yellow - Color may vary.

This robust DC dimmer is designed to give you full control over voltage-regulated devices such as powerful 12V/24V pumps. It is particularly well-suited for precise regulation of devices like our powerful 60W pump, where speed control is crucial. Features: Stepless adjustment from 0 to 100% via rotary knobCompact designInput voltage: DC 12–24V

Durable manual bottle capper made of high-strength ABS material and 304 stainless steel, designed for home brewing and small beer halls. Features a double handle for ergonomic use, a magnet to securely hold caps, and compatibility with various crown caps and standard bottles. Compact size allows for convenient storage.For 26mm crown caps.

Thermometer Floating 9" with orange cap. Measures: -20º to 100º Celsius och 0º to 220º Fahrenheit. Length:: ca 23cm (9")

Multifunctional cleaning agent for use in the food and beverage industry. Discover this new addition to the Chemipro range!effective at all temperaturessafe to use on all types of plastics and soft metalsgenerates 4-5% oxygenhigh hard water toleranceremoves protein soil and stains, encrusted starch and fatty acidsdo not use on Teflondosage for general cleaning: 7-14 g/litredosage for intensive cleaning: 21 g/litreDirections for use:use 7-14 g per litre of warm water for general cleaning. Scrub or soak for 30 minutes. Use Chemipro CIP or SAN for rinsing. Keep out of reach of children. Chemipro Wash is a registered detergent Danger. Contains: SODIUM METASILICATE 15%-30%; SODIUM CARBONATE PEROXIDE 15%-30%; SODIUM SILICATE 5% - 15%; CAPRYLETH-9 CARBOXYLIC ACID

The Bucket Blaster from Kegland is a great way to get your kegs, fermenters, fermzilla, carboy's or other brewery gear clean while you attend to other tasks. Take the work out of cleaning cornelius kegs, carboys and brewing vessels with the bucket blaster. Simply set up the keg washer basin with your cleaner or sanitiser, set a keg or carboy on over the jet nozzle, power up pump and let the keg washer do the work.  This unit comes with a 15L bucket which doubles as a storage container when you are not using the system.  Some other keg washers come with a very small reservoir making it a pain to move, liquid spils over the sides easily and generally they just do not work as well.  This unit has a large 15L bucket making it much less likely for you to spil liquid on your floor. This system includes:- 2000 liter per hour submersible pump- 15L bucket- Powerful jet nozzle- 3/8" EVABarrier tubing- duotight tee piece- grey and black ball lock disconnect- stainless steel stand.  Some other keg washers have the ball lock disconnects and tee piece sold separately but this is included in the kit.Kegs and fermenters are not included.Read the manual here

This is a EPDM 5/8 Washer which is suitable for Keg Couplers and Tap Shanks. (10 Pack) - 15mm ID x 21.5mm OD x 3mm. EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, wide variety of alkaline and acid compounds, water, alcohol, ketone and beverages. EPDM is also resistant to aging, weather and will not perish easily like other rubber compounds.   When compared with silicon and vinyl EPDM has better gas transmission rates, better wear resistance, is BPA free and is the number one choice for many long lasting food grade applications. Specifications:15mm ID x 21.5mm OD x 3mm

Our 30w Heating belts will gently warm without creating major hot spots on your fermenter. We've chosen to go belts over pads for the simplicity of adjusting the height of the belt on your fermenter to increase or decrease the heat transfer. With a pad, you're unable to do this, and may potentially cook your yeast turning your hard work into a giant bandaid.- Belt Length: 900 mm - 2m power cable- Power: 220V-250V / 30W - Gives you a quicker, more complete fermentation. - Easy to store away after use unlike heat pads.Can be used on:- Barrels - Kegs - Carboys - Buckets - Demijohns

The Super Sucker transfer pump is the quickest, most hassle-free solution to moving beer, wine, cider or spirits between vessels. Rack from the primary fermenter to secondary or from carboy to keg without the excess oxygen exposure that results from hand-pumping a siphon or blowing into a carboy hood. - Transfer beer, wine, cider and spirits between vessels without the hassle of starting a siphon.- Place your receiving vessel side-by-side or even above the transferring vessel.- Perfect for transferring between primary and secondary fermenter, or from fermenter to bottling bucket or keg.- Reduce excess oxygen exposure caused by hand-pumping or blowing into a carboy hood to start a siphon. Simply run transfer tubing from a racking cane to the pump and then to your receiving vessel, flip the switch, and let the Super Sucker do the work while you kick back and enjoy a cold one. With the Super Sucker you don't need gravity or CO2 pressure to move liquid around. Thanks to the pump's considerable max lift height, you can leave your heavy, full fermenter on the ground and place the receiving keg or carboy side-by-side or even above the fermenter on a countertop. The 1/2 Inch BSP inlet and outlet are perfect for use with 1/2 Inch push in fittings such as: monotight - 6.35mm (1/4") x 1/2" Female Threadduotight - 9.5mm (3/8") Female x 1/2" Female ThreadIt is important to remember to clean thoroughly and store dry to avoid potential sites of infection. We would recommend flushing/recirculating with a diluted mix of StellarSan for at least 2 minutes of contact time prior to using this pump.  Features:Self-Priming1/2 Inch BSP Inlet/OutletOn/Off SwitchMax Flow: 4.23 L/minSuction: 127mmMax Lift: 3.8mMaximum Temperature: 60°CPressure: 90 psiVoltage: 12V DC (3.5A)Power Cord Length: 1.2m (EU-cord)Power Adaptor Cord Length: 70cmPower Switch Cord: 25cm

This kit has been designed for simplicity and ease of putting together. If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job. The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure. This BlowTie unit can be easily disassembled for cleaning using a Phillips head screwdriver. Instructions:Use the yellow adjustment knob to control the pressure coming out of the pressure vessel.  Clockwise is higher pressure and anticlockwise is lower pressure.We would recommend gassing a keg to a known pressure e.g. 15psi then attach your Blow Tie Kit to the keg and adjust to 10psi. Specifications:1. Made from food-grade acetal2. Stainless screws3. 8mm (5/16") push on both sides4. 0-15psi pressure ratingPlease note: The joiners are a semi-permanent fitting. You will not be able to remove the fittings easily. If you would like to have a completely removable fitted kit we would suggest using EVABarrier 4mm ID or 5mm ID hose as the joining pieces. This Kit Includes:1 x KL03643 BlowTie Diaphragm Spunding Valve1 x KL02387 duotight – 8mm (5/16”) Female x 8mm (5/16”) Female Double Tee Piece1 x KL06880 duotight – 8mm (5/16”) Female x FFL Female Thread1 x KL14816 8mm Push In Pressure Gauge 0-15psi1 x KL02967 Premium Ball Lock Disconnect (MFL) Grey/Gas2 x KL18012 8mm Rigid Plaster Joiner With pressurised fermentation becoming ever more popular it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process.  The BlowTie has been designed specifically for this reason. For more information about the many benefits of pressure fermentation please see this article. Pressure TransfersWhen transferring from keg to keg, keg to bottle, or fermenter to keg it's often a good idea to have head pressure in the keg you are filling into especially if you are transferring a beverage that is carbonated. For this reason the BlowTie can consistently control this head pressure giving you more consistent results and without losing carbonation in the process. Traditional spunding valves that use a simple spring against a seal are flawed right from the beginning as the physical aspects of the design dictate that you will have a significant difference between the opening pressure and closing pressure during operation.  Brewers have tolerated this imperfection for long enough and now you can control these pressures far more accurately.The BlowTie has been made completely differently taking advantage of a diaphragm to actuate the sealing mechanism that will release pressure from the pressure vessel with much more accurate control pressure.

Easily dispense your wine with this sturdy Bag In Box holder made from Stainless steel. Safely secure your tap in the holder to avoid any missteps. Can be mounted on both walls and tables using the 4 pre-drilled holes.Height: 12 cmDepth: 13 cmWeight: ca 500g

Conical silicone plug stopper without hole. Cylindroconical form.Diameter Top: 19 mmDiameter Bottom: 14 mmHeight: 26 mm

Conical silicone plug stopper without hole. Cylindroconical form.Diameter Top: 23 mmDiameter Bottom: 17 mmHeight: 26 mm

Silicone plug stopper without hole. Cylindroconical form.Diameter Top: 26 mmDiameter Bottom: 19 mmHeight: 28 mm

Silicone plug stopper without hole. Cylindroconical form.Diameter Top: 65 mmDiameter Bottom: 53 mmHeight: 38 mm

Multi-purpose draft system tool for taps, regulators and fittings. The KegLand 7 in 1 Faucet Spanner is designed for common dispensing hardware including shank nuts, regulator fittings and Duotight connections.DescriptionThe KegLand 7 in 1 Faucet Spanner / Wrench Tool is a compact, purpose-built tool for installing, adjusting and maintaining draft beer systems. Designed for homebrewers and kegerator owners, it covers the most common tap, regulator and fitting sizes in one practical piece. Instead of juggling multiple spanners, this single tool handles the key fittings used across kegging and dispensing setups.Key Features & ApplicationsThis handy tool is exactly what you need to fit numerous dispensing applications: 27mm spanner – Nut behind your tapsFaucet collar ring – Connects your tap to the shankType 30 regulator nut – Attaching your regulator to a CO₂ bottleFFL fitting – Tighten/undo MFL connections (e.g. barbed fitting on a CO₂ regulator)Integrated bottle opener8mm Duotight removal tool – Removes 8mm EVABarrier tubing9.5mm Duotight removal tool – Removes 9.5mm EVABarrier tubingA true all-in-one maintenance tool for modern kegging systems.

Practical Zip-lock bag with zipper (zipper bag) in food-approved, clear and tear-resistant 60um Polyethylene plastic. Easy to open and close with the zipper, and no problems with opening and closing as with regular zip bags without a zipper. 100% Recycleable.Perfect for storing products, food, malt, hops, etc.Opening (with Zip-lock): 320 mmHeight: 440 mmSee image to the right for reference to Opening and Height.Products in the bag are for illustration only and not included.

24 Steinie beer bottles of 33 cl for 26mm crown caps. The box dividers protect the bottles from breakage. Use this handy box to store your artisan creations. stackable boxreusable and recyclableless chance of breakage due to individual compartmentswith carry handles for your convenienceBottle closure (not included): 26mm crown caps (crown corks) Dimensions and weight per bottle:Weight0.303 kgHeight17.9 cmWidth6.8 cm

Crown Caps 26mm. Oxygen Scavenging which means less oxidation.

Digital thermometer from Better Brew with a stainless steel probe attached via a 1 meter wire to the LED digital reader which has a range of -50C-200C, and is accurate to within 1C. The thermometer can a be set to Fahrenheit or centigrade readings. The temperature reader has a large easy to read LCD screen. Ideal for user all your brewing situations, mash, boil or fermentation.Temperature Range: -50°+ - 200° grader CAccuracy: +/- 1°Functions: Hold, settings between Celcius and Farenheit, Max/Min-memoryBattery: 1 pc AAA-battery (included)Note: Cannot be used in an oven due to the plastic handle on the probe.

Cooling Spiral 15m in stainless steel for faster cooling of the wort. The fittings fit 3/4-inch Quick Connect garden hose connectors.Spiral tube diameter: 10 mmTotal diameter: 24 cmTotal height: 69 cmThreads: 3/4-inch (fit 3/4-inch Gardena-style garden hose connectors.)

This heat insulation jacket is designed to be used with the Grainfather to keep heat contained in the boiler and maintain a constant temperature during your brew during cooler times of the year.Grainfather Graincoat Features - Material - SBR Foam (7 mm thickness)- Designed for the Grainfather for heat insulation, especially in colder temperature areas.- Easy to wipe clean, polyurethane outer layer, and machine washable.

Thermometer Floating

Perfect for small batch brewing, where you can test different beer styles or recipes and have more varieties of beer on the go. The Micro Pipework is perfect for brewing 10 L beers, or standard batches of a lower ABV beer with a small grain bill. Use this pipework when you are brewing with 2 kg - 4 kg of grain. Made in 304 Stainless steel.

Whirlpooling and aerating is good practice before you pump the wort out of your brewing system. It infuses oxygen which promotes enhanced yeast activity and places the hops and protein back into suspension before the filtering process. The Grainfather Whirlpool and Aeration Brewing Paddle provides an excellent whirlpool by allowing the perfect amount of liquids and solids to pass through its large blades. Just simply attach to a standard electric power drill via its ‘chuck bit’ styled end for relaxed aeration of your wort. Grainfather Whirlpool and Aeration Paddle:- 304 stainless steel, 8mm (1/3”) drill bit end and 12.5 cm (5”) wide blades- Designed to be easily attached to a power drill via an 8mm (1/3”) drill bit style end- Plugged at the end- 56cm (22”) long, perfect for use in large boilers and smaller stove top kettles- 12.5cm (5”) wide blades to create a strong aeration and whirlpool

Bazooka Screen 30cm (12"). Stainless steel. Large mesh size - Mesh size: 16 (1mm)

Malt Scoop Stainless Steel