Equipment

Double iTap2 draft beer tower- For 2 iTap2 dispensers- Holes to hide all the tubes and hoses- Professional look

Double iTap draft beer tower- For 2 iTap dispensers- Holes to hide all the tubes and hoses- Professional look

Note: fits only V3. Glass cap that fits both 40L and 70L Brewly V3 breweries.

Spare part. Brewly L-pipe for Brewly Brewery 40L and 70L Pump Inlet. Material is stainless steel. Keeps hop and malt debris at the bottom of the brewery from entering the pump inlet. May also fit Brewolution BB40 and BB70 which has similar construction.The pipe inlet is ca 40mm above the brewery's bottom. Total height avobe bottom is ca 45mm. The pipe length horizontally is ca 110mm.Outer diamater pipe: 10mm.

Cornelius keg 9 liter (2.4 gallon) with ball-lock and protective rubber around the ball locks and bottom. Very high quality.Materials: Stainless steel SS304 and rubberHeight: 340 mm (± 2 mm)Diameter: 219 mm (± 2 mm)Weight: 3.7 kg (shipping weight 5.5 kg)Made by A.E.B. In Italy

Cornelius keg 12 liter (3.2 gallon) with ball-lock and protective rubber around the ball locks and bottom. Very high quality.Materials: Stainless steel SS304 and rubberHeight: 422 mm (± 2 mm)Diameter: 219 mm (± 2 mm)Weight: 4.2 kg (shipping weight 6.5 kg)Made by A.E.B. In Italy

Cornelius keg 23 liter (6 gallon) with ball-lock and protective rubber around the ball locks and bottom. Very high quality.PPRV (Pressure Release Valve): 7-9 Bars (100-135 PSI)Materials: Stainless steel SS304 and rubberHeight: 670 mm (± 2 mm)Diameter: 228 mm (± 2 mm)Weight: 4.8 kg (shipping weight 10 kg)Made by A.E.B. In Italy

Small keg with quick-connectors for gas and beer. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 3 liters Height: 27.5 cm (33 cm incl. quick connector valve) Diameter: 13.5 cm Weight: 950 g Manufacturer: Mangrove Jack's

Now you can upgrade your DigiBoil 35L with this stainless malt basket and false bottom. This complete kit makes it easy to mash, sparge and filter out hops in your DigiBoil.The malt basket is placed on top of the included false bottom with feet to avoid the malt closest to the heating element in the bottom gets burnt. To get the best results and an even temperature, it is recommended that you only use the weaker heating element of the Digiboil during mashing.After the mashing is complete, you sparge by lifting, rotating and placing the malt basket on the stand mounted on the inside of the top of the pot.The false bottom with feet can also continue to be needed during cooking to prevent particles from burning into the bottom. It also works as a hop and debree filter after the wort cooling when transferring the wort to the fermenter.This is included in the DigiBoil Mash Upgrade Kit:- Malt basket (Malt pipe)- False bottom for the malt pipe- False bottom with feet- Lifting handle- Stand for the malt basketDimensions:Height: 38.5 cmDiameter at the top: 29.5 cmMaterial: Stainless steel

Now you can upgrade your DigiBoil 65L with this stainless malt basket and false bottom. This complete kit makes it easy to mash, sparge and filter out hops in your DigiBoil.The malt basket is placed on top of the included false bottom with feet to avoid the malt closest to the heating element in the bottom gets burnt. To get the best results and an even temperature, it is recommended that you only use the weaker heating element of the Digiboil during mashing.After the mashing is complete, you sparge by lifting, rotating and placing the malt basket on the stand mounted on the inside of the top of the pot.The false bottom with feet can also continue to be needed during cooking to prevent particles from burning into the bottom. It also works as a hop and debree filter after the wort cooling when transferring the wort to the fermenter.This is included in the DigiBoil Mash Upgrade Kit:- Malt basket (Malt pipe)- False bottom for the malt pipe- False bottom with feet- Lifting handle- Stand for the malt basketDimensions:Height: 40cmDiameter at the top: 38,5cmMaterial: Stainless steel

Silicone plug stopper for airlock with 9mm hole. Cylindroconical form.Diameter Top: 49mmDiameter Bottom: 41 mmHeight: 30 mmHole: 9 mm

Bomex Erlenmeyer flask with wide mouth and excellent thermal and chemical performance thanks to the Borosilicate glass. Ideal for yeast starters. Boil the wort, or malt extract and water, in the flask on a stove/hot plate. Cool in water bath and then add yeast. Close them flask mouth with aluminum foil or fermenter airlock.Bomex Wide-Neck Erlenmeyer Flask 1000mlVolume: 1000 ml.Height: 215 mm.Diameter bottom: 135 mm.Diameter neck (inside): ca 43 mm.

Bomex Erlenmeyer flask with wide mouth and excellent thermal and chemical performance thanks to the Borosilicate glass. Ideal for yeast starters. Boil the wort, or malt extract and water, in the flask on a stove/hot plate. Cool in water bath and then add yeast. Close them flask mouth with aluminum foil or fermenter airlock.Bomex Wide-Neck Erlenmeyer Flask 250mlVolume: 250 ml.Height: 140 mm.Diameter bottom: 85 mm.Diameter neck (inside): ca 31 mm.

Low Glass Beaker - The standard low form beaker with spout was originally devised by John Joseph Griffin, an English chemist, in the nineteenth century. This laboratory icon has gone on to become one of the most widely used items of laboratory glassware.Glass Beaker Borosilicate Low 250mlVolume: 250 mlHeight: 10 cm.Bottom diameter: 7 cm.

Low Beaker made from Borosilicate glass with high heat- and chemical resistance. The standard low form beaker with spout was originally devised by John Joseph Griffin, an English chemist, in the nineteenth century. This laboratory icon has gone on to become one of the most widely used items of laboratory glassware.Glass Beaker Borosilicate Low 100mlVolume: 100mlHeight: 7,5 cm.Bottom diameter: 5,4 cm.

Low Beaker made from Borosilicate glass with high heat- and chemical resistance. The standard low form beaker with spout was originally devised by John Joseph Griffin, an English chemist, in the nineteenth century. This laboratory icon has gone on to become one of the most widely used items of laboratory glassware.Glass Beaker Borosilicate Low 400mlVolume: 400mlHeight: 12 cm.Bottom diameter: 8 cm.

Low Beaker made from Borosilicate glass with high heat- and chemical resistance. The standard low form beaker with spout was originally devised by John Joseph Griffin, an English chemist, in the nineteenth century. This laboratory icon has gone on to become one of the most widely used items of laboratory glassware.Glass Beaker Borosilicate Low 600mlVolume: 600mlHeight: 13,5 cm.Bottom diameter: 9 cm.

Low Beaker made from Borosilicate glass with high heat- and chemical resistance. The standard low form beaker with spout was originally devised by John Joseph Griffin, an English chemist, in the nineteenth century. This laboratory icon has gone on to become one of the most widely used items of laboratory glassware.Glass Beaker Borosilicate Low 1000mlVolume: 1000mlHeight: 15,5 cm.Bottom diameter: 11 cm.

Low Beaker made from Borosilicate glass with high heat- and chemical resistance. The standard low form beaker with spout was originally devised by John Joseph Griffin, an English chemist, in the nineteenth century. This laboratory icon has gone on to become one of the most widely used items of laboratory glassware.Glass Beaker Borosilicate Low 2000mlVolume: 2000mlHeight: 20 cm.Bottom diameter: 13,5 cm.

Glass beaker with very high heat and chemical resistance. The standard low form beaker with spout was originally devised by John Joseph Griffin, an English chemist, in the nineteenth century. This laboratory icon has gone on to become one of the most widely used items of laboratory glassware.Bomex Low Beaker 3000mlVolume: 3000mlHeight: 24 cm.Bottom diameter: 15 cm.

Durable rubber stopper for test tubes, pistons M.M. Top: 38mm. Bottom: 29mm.

Durable plastic measuring jug 1L graded in deciliters. The measure also has grams scales for flour, rice and sugar. Volume: 1 liter. Dimensions: diameter 13 cm, height 15 cm. Material: Crystal clear impact resistant San-plastic.

High Beaker made from Borosilicate glass with high heat- and chemical resistance. The standard low form beaker with spout was originally devised by John Joseph Griffin, an English chemist, in the nineteenth century. This laboratory icon has gone on to become one of the most widely used items of laboratory glassware.Glass Beaker Borosilicate High 400ml Volume: 400 ml. Height: 14 cm. Bottly diameter: 7 cm.

High Beaker made from Borosilicate glass with high heat- and chemical resistance. The standard low form beaker with spout was originally devised by John Joseph Griffin, an English chemist, in the nineteenth century. This laboratory icon has gone on to become one of the most widely used items of laboratory glassware. Glass Beaker Borosilicate High 1000ml Volume: 1000 ml. Height: 18 cm. Bottly diameter: 10 cm.

Bomex Erlenmeyer flask with wide mouth and excellent thermal and chemical performance thanks to the Borosilicate glass. Ideal for yeast starters. Boil the wort, or malt extract and water, in the flask on a stove/hot plate. Cool in water bath and then add yeast. Close them flask mouth with aluminum foil or fermenter airlock.Bomex Wide-Neck Erlenmeyer Flask 2000mlVolume: 3000ml. Height: 315 mm. Diameter bottom: 190 mm. Diameter neck (interior): about 42 mm.

Bomex Erlenmeyer flask with wide mouth and excellent thermal and chemical performance thanks to the Borosilicate glass. Ideal for yeast starters. Boil the wort, or malt extract and water, in the flask on a stove/hot plate. Cool in water bath and then add yeast. Close them flask mouth with aluminum foil or fermenter airlock.Bomex Wide-Neck Erlenmeyer Flask 5000 mlVolume: 5000ml. Height: 365 mm. Diameter bottom: 220 mm. Diameter neck (inside): about 41 mm.

Simax graded and sterilizable bottle in heat- and chemical resistant borosilicate glass. With blue screw capsyl of plastic.Simax Glass Bottle Borosilicate 500ml Volume: 500 ml. Dimensions: Diameter 86 mm, height with cap 180 mm.

Plastic dropper bottle 500ml

Bottle in brown glass, complete with glass pipette.

The Milwaukee MW600 PRO Portable Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy. The Milwaukee PRO DO Meter is preferred by people looking for lab level accuracy without the cost. The Milwaukee DO Meter is popular with everyone from field biologists and educators to fish farmers and koi pond owners.- Fast, easy-to-read results with large digital LCD readout- Repeatable, accuracy to ±1.5% FS- Lightweight and portable- Simple 2 point open air calibration (see video below)- Uses MA840 reinforced polarographic probe with an oxygen-permeable polytetrafluroethylene (PTFE) membrane sensor- 5 o-rings, membranes and one protective cap included- 10 feet probe cable for extra flexibility when testing- 70 hours of battery life with continuous use (battery included) with low battery warningSPECIFICATIONSO2 Range: 0.0 to 19.9 mg/LO2 resolution: 0.1 mg/LO2 Accuracy: ±1.5% Full ScaleCalibration: Manual on 2 points (zero and slope)Temperature Compensation: Automatic, from 0 to 30°CProbe: MA840 refillable polarographic probe includedMembranes: 5 includedEnvironment: 0 to 50°C / 32 to 122°F; max RH 95%Battery Type: 1 x 9V alkaline (included)Battery Life: Approx. 70 hours of continuous useDimensions: 5.7 x 3.1 x 1.6 inchesWeight: 7.5 ounces with batteryNOTE! You need "Milwaukee MA9070 Solution" to be able to calibrate this meter!CARE AND USE“OPEN AIR” CALIBRATION PROCEDURE1. Remove the membraneTake the membrane off the end of the probe and dry the diode off.2. Zero out the displayConnect the probe to the base unit and turn the unit on. Your display should read 0.0. If it does not, go to the position “0” screw on the front of the unit with the screw driver provided and through the access hole make the unit display read 0.0.3. Fill the membraneGo to the membrane and put the “O” ring inside the membrane on the shoulder at the base of the threads. Fill the membrane to just short of the “O” ring with MA9071 electrolyte solution. Be sure that there are no bubbles inside the membrane. (Air bubbles are the main cause of calibration failure)4. Attach the membraneScrew the membrane on to the probe.5. Let stablizeTurn the meter on and hang the probe off the end of a table pointing down and let the unit display stabilize (this may take 5 to 15 minutes)6. AdjustPush down and hold the “Cal” button on the front face of the meter and with the screwdriver go to the front Cal position “100%” and make the display read 100.You are now calibrated.EXTRA TIPS- Watch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane.- Always use fresh electrolyte solution (MA9071).

The MA9071 electrolyte fill solution is designed for Milwaukee's polarographic dissolved oxygen probe. A high quality electrolyte solution is crucial to the performance of your dissolved oxygen probe.DESIGN FEATURESPRECISE FORMULATIONFactory mixed using reagent grade chemicals in a dedicated, temperature controlled environment.TRACEABLEProduct labeled with product code, lot number and expiration date.SECUREAir tight bottle with tamper-proof seal.USE AND CARE“OPEN AIR” CALIBRATION PROCEDURE FOR THE MW600 DISSOLVED OXYGEN METER1. Remove the membraneTake the membrane off the end of the probe and dry the diode off.2. Zero out the displayConnect the probe to the base unit and turn the unit on. Your display should read 0.0. If it does not, go to the position “0” screw on the front of the unit with the screw driver provided and through the access hole make the unit display read 0.0.3. Fill the membraneGo to the membrane and put the “O” ring inside the membrane on the shoulder at the base of the threads. Fill the membrane to just short of the “O” ring with MA9071 electrolyte solution. Be sure that there are no bubbles inside the membrane. (Air bubbles are the main cause of calibration failure)4. Attach the membraneScrew the membrane on to the probe.5. Let stablizeTurn the meter on and hang the probe off the end of a table pointing down and let the unit display stabilize (this may take 5 to 15 minutes)6. AdjustPush down and hold the “Cal” button on the front face of the meter and with the screwdriver go to the front Cal position “100%” and make the display read 100.You are now calibrated.EXTRA TIPSWatch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane.Always use fresh electrolyte solution (MA9071).

The MW700 is a portable Lux meter designed to perform light measurements from 0 to 50000 Lux. This handy and ergonomically designed Lux meter is ideal for anyone looking for fast and reliable light measurements. This meter is suitable for a wide range of application. Note that the sensor is NOT waterproof.Average indoor lighting ranges from 100 to 1000 Lux and average outdoor sun lights about 50000 Lux. Lux is a unit that indicates the density of light that falls on a surface.The human eye is sensitive only to blue, green, and red light, so in calculating the Lux falling on an object, only the light that the human eye sees is counted. When only infrared light falls on an object, the Lux is counted as zero since our eyes see nothing. Mathematically, a spectral weighting function becomes convolved with the actual illumination spectrum to calculate Lux exactly.This is the formal definition of Lux and it makes Lux an unusual unit of measure. Still, Lux can be thought of as a way of measuring light in terms of what our eyes perceive. The metric unit of measure for luminance of a surface. One Lux is equal to one Lumen per square meter. One Lux equals 0.0929 footcandles. DESIGN FEATURESFast, easy-to-read results with large digital LCD readout, silicon photodiode sensor attached to a 4.4' cable, Three resolution settings - 1, 10, and 100 Lux, Accuracy to ±6% of reading ±1 digitLightweight and portable, 150 hours of battery life with continuous use (battery included) with low battery warning.SPECIFICATIONS Milwaukee MW700 PRO Lux (Light) MeterRange: 0.000 to 1999 Lux; 2000 to 19999 Lux; 20000 to 50000 LuxRange Setting: Manual through key buttonsResolution: 0.000 to 1999 Lux: ±1 Lux; 2000 to 19999 Lux - ±10 Lux; 20000 to 50000 Lux - ±100 LuxAccuracy: ±6% of reading ±1digitsPeak wave length: 560 (nm)Sensor type: Silicon Photodiode (connected to meter)Sensor sensitivity: 100 scotopic LUXSensor stability: ±2% change per year (in first two years)Environment: 0 to 50°C / 32 to 122°F; max RH 95%Battery Type: 1 x 9V alkalineBattery Life: Approx. 150 hours of continuous useAuto-off: after about 5 minutes of non-useDimensions: 5.6 x 3.1 x 1.25 inchesWeight (meter with sensor): 9.5 ounces

The Milwaukee MW150 MAX 3-in-1 pH/OPR/Temp. Bench Meter has won fans around the world with its reliable, fast, simple operation as well as a tough, sleek, lightweight design with a small lab space footprint. It is accurate to ± 0.01 pH with automatic or manual temperature compensation, and built in dedicated GLP key. In addition, up to 3-point automatic calibration and 7 selectable buffer standards makes the MW150 MAX ideal for use by brewers, wine makers, growers, labs, food processing, water treatment and many other applications with challenging pH measurement needs. Both adaptor and battery powered.WHAT PEOPLE ARE SAYING"Amazingly accurate, the best meter I have used so far.""Very satisfied, very accurate, rugged device that calibrates easily.""Rarely needs to be calibrated and gives perfect readings every time.""Killer tool, good value.""Takes up hardly any space in the lab.""Love the GLP function.""Large easy-to-read dual displays.""Easy to Clean."SUMMARYThe Milwaukee MW150 MAX 3-in-1 PRO pH/ORP/Temp Bench Meter is preferred by people testing all types of samples viscus or not, in a variety of applications that cause other pH meters and electrodes to fail. The MA917B/1 Milwaukee double junction electode is refillable and easy to clean. From brewers and wine makers to hydroponic growers, labs and water treatment, the MW150 MAX is your Bench Meter for fast, accurate readings.The Milwaukee MW150 MAX pH Bench Meter offers:ACCURACYPeople choose the MW150 MAX 3-in-1 pH/ORP/Temp Meter to improve the accuracy of their testing program. With up to 3 point calibration and 7 standard buffer choices, the meter can be quickly calibrated to a higher accuracy compared with 1 or 2 point calibration. The MW150 MAX Bench Meter is accurate to ± 0.01 pH. 5x more accurate than some alternative meters.The meter comes with a double junction pH electrode (included) and temperature sensor MA831R (included) allowing the meter to automatically adjust the pH reading for the effect of temperature (ATC).The meter can also be used as a very accurate thermometer with accuracy +/-0.4°C | +/-0.8°F.TOUGHNESSThe rugged meter is built to take knocks and is sleek and lightweight .LOW MAINTENACEThe MW150 MAX pH/OPR/Temp Bench Meter comes with the Milwaukee refillable glass MA917B/1 pH electrode and has a BNC connector allowing easy interchange to any pH Milwaukee electrode. This is Milwaukee's top selling lab grade electrode for a reason. Designed to be both low maintenance (refillable) and able to withstand more challenging samples (double junction). The MA917B/1 is ideal for use in beer making, winemaking and hydroponics, environmental labs and many other applications.DESIGN FEATURESFast easy to read results with large duel level digital LCD readout.Extreme accuracy to ±0.01 pH | +/-0.4°C | +/-0.8°F.Extended range (-2.00 pH to 20.00 pH).Lightweight and small bench footprint.Easy measurement: just place the pH electrode and temp. probe in the sample, gently stir and wait for the reading to stabilize.Simple push button, automatic up to 3 point calibration for increased accuracy.Up to 7 selectable pH calibration buffers (1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45).Refillable, double junction, lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage.Automatic Temperature compensation (ATC).Built-in rechargeable battery with 8 hours battery life (battery included).Alphanumeric LCD display messages for friendly, intuitive information, warnings and error messages.Internal clock date to keep track of different time-dependent functions (calibration, timestamp,calibration time out).Dedicated GLP key function.3 feet probe cables for extra flexibility when testing.CARE AND USEpH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.SENSING BULBThe glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.REFERENCE JUNCTIONThe reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.You can extend the life of your pH electrode in the following ways.CLEANING AND STORAGEAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!STORAGETo minimize clogging the pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.Storing in pH probe storage solution or pH calibration buffers will help address both these issues. Do not store in tap water or DI water. This will damage the sensitivity of the probe.The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.CLEANING AN MAINTENANCEResidue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution. Also:1. Inspect the electotrode for damage or scratches, if present replace the electrode.2. Inspect the cable. The connection cable and insulation must be intact.3. Connectors should be clean and dry.4. Rinse off salt deposits with water or DI water.CALIBRATIONThe pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus Bench pH Meter accurate. Also, calibrate after cleaning or a long period of storage.Thank you for considering Milwaukee to help you take your results to the next level.

Food grade PVC hose. Also suitable as acid and laboratory hose and as vacuum hose. Resistant to acids, saline, alkali, flavor, soap and synthetic detergents, sulfates, animal and vegetable oils, ethyl alcohol and glycol.Not resistant to organic solvents, esters, ketones, acetone, tri and aroma, hydrocarbons.PVC HoseInner diameter: 7 mmOuter diameter: 10 mm (ca 3/8")Working temperature: -10 ° C to + 50 ° C, but should not be used at normal working pressure at temperatures higher than + 30 ° CColor: TransparentMaterial: Made of soft transparent PVC.Approved for use in the food industry.NOTE: Sold per meter, so if you select 2 in the selection box for number, you get 2 meters of hose. The dimensions can differ by about +/- 10mm.

Brew Pot 56 liters in stainless steel with lid and a thick bottom that works with all types of hobs including induction. Volume: 56 liters Inner height: 450 mm Inner diameter: 400 mm Material: Stainless 436 steel (1mm thickness). Incapped bottom with 4 mm thick aluminum core.

Brew Pot 78 liters in stainless steel with lid and a thick bottom that works with all types of hobs including induction. Volume: 78 litersInner height: 500 mmInner diameter: 445 mmMaterial: Stainless steel 201 (1mm thickness).Encapsulated bottom with 4 mm thick aluminum core.

Brew Pot 94 liters in stainless steel with lid and a thick bottom that works with all types of hobs including induction. Volume: 94 litersHeight: 56 cmWidth: 52 cm with handle.Material: Stainless steel 201 (1mm thickness).Encapsulated bottom with 4 mm thick aluminum core.

Brew Pot 32 liters with valve in stainless steel with lid. Thick bottom that works with all types of hobs, induction included.Inner height: 340 mmInner diameter: 346 mmMaterial: Stainless steel 201 (1mm thickness).Encapsulated bottom with 4 mm thick aluminum core.Nipple diameter: 12 mm. NOTE! The bushing is welded. Also suitable for Bazooka Screen on the inside. Hose nipple included! 

Brew Pot 56 liters with valve in stainless steel with lid. Thick bottom that works with all types of hobs, induction included.Volume: 56 litersInner height: 450 mmInner diameter: 400 mmMaterial: Stainless steel 436 steel (1mm thickness).Encapsulated bottom with 4 mm thick aluminum core.Nipple diameter: 12 mm NOTE! The bushing is welded. Also suitable for Bazooka Screen on the inside. Hose nipple included! 

Brew Pot 78 liters with valve in stainless steel with lid. Thick bottom that works with all types of hobs, induction included.Volume: 78 litres Inner height: 500 mmInner diameter: 445 mmMaterial: Stainless steel 201 (1mm thickness).Encapsulated bottom with 4 mm thick aluminum core.Nipple diameter: 12 mm NOTE! The bushing is welded. Also suitable for Bazooka Screen on the inside. Hose nipple included! 

Brew Pot 78 liters with valve adn thermometer in stainless steel with lid. Thick bottom that works with all types of hobs, induction included.Volume: 78 litres Inner height: 500 mmInner diameter: 445 mmMaterial: Stainless steel 201 (1mm thickness).Encapsulated bottom with 4 mm thick aluminum core.Nipple diameter: 12 mm NOTE! The bushing is welded. Also suitable for Bazooka Screen on the inside. Hose nipple included! 

Glass jar 4L with lid and tap with many uses, such as: fermentation of beverages such as Kombucha, for cold beverages such as beer, cider, wine, juice, ice water or lemonade.Note: During fermentation, the lid must be slightly open, with eg. a muslin bag in between. The lid must be opened a little to make the tap work, this is due to that a vacuum is formed in the glass when the lid is on. Must NOT be pressurized.- Capacity: 4 liters- Dimensions (approx.): 27 x 16 x 16.5 cm (HxWxD)- With lid and tap.- Hand wash only.- Not for hot drinks.

Strainless steel false bottom with three support legs and a lifting handle. An excellent upgrade for your Grainfather G30 that prevents blockage of the pump, and also prevents burnt residue that coats the bottom and triggers the over heating fuse because of "hot spots". Also works great as a spacer grid BIAB-brewing. Please note: NOT Grainfather original, its a spare part for Brewzilla 35L. Also fits Grainfather G30, Digiboil 35 l and Beer Brew 30.Note: The lifting handle needs to be bent slightly so that it fits under the Grainfather malt pipe. Material: Stainless SteelDiameter: 297 mmHole diameter: 2 mmSpare part for Brewzilla 35 l. Also fits Grainfather G30, Digiboil 35 l and Beer Brew 30.

Easy-to-use magnetic stirrer with good capacity. Infinitely variable speed and durable plastic construction that can withstand a little spill. Rotatable stand for e.g. thermometer or pH probe included. Stable base with rubber feet. Ultra silence and vibration-free design. Stackable, which saves space during storage.Material: Durable plastic cover.Speed: Stepless 300-2000 rpm.Capacity: 1.5 liters.Power supply: 12V from the included 230V mains adapter.Max Power: 7,2WDimensions: Diameter top 120 mm, max 160 mm. Height 55 mm without stand, 230 mm with stand.Weight: 300 g.Protection class: IP21Accessories: Stand with holder (for probe max 12 mm) included.

PTFE-coated powerful stirr bar magnet with ring for magnetic stirrers. Dimensions: 27x8 mm.

PTFE-coated powerful stirr bar magnet with ring for magnetic stirrers. Dimensions: 45x8 mm.

PTFE-coated rod for easy pickup of stirr magnets. Strong magnet, withstands heat, cold and has very high chemical resistance. Magnetic stirrer, stirrer magnets and beakers are ordered separately.Material:PTFE-coated metal with strong magnet.Dimensions: Length 345 mm, diameter 10 mm.

Fine-mesh bottom filter to avoid larger particles in the wort during mashing. Also fits Brewolutions Brewster.diameter 355mm