Kegland

PET Keg 20L Oxebar Amber from Kegland with Ball Lock connectors, Dip Tube, Floater & Handle is a very easy and convenient way to store and transport beer compared to heavy and bulky steel kegs like Cornelius kegs. It's a very inexpensive way to serve draft beer and bring beer to all kinds of events. Because it can be washed and reused, it's also an inexpensive way to store your beer. Do not exceed 4 Bar / 65psi. With the special polymer mixture, the oxygen barrier is improved three times compared to regular PET. Beer can easily be stored up to 6 months in these kegs. Diameter 235mmHeight 640mm  Do not exceed 4 Bar / 65psi. Contains:- 20L PET Keg Oxebar Amber Mono Barrier- Lid with handle- Green relief valve (65 psi/4.5 bar)- 1 meter silicone hose (dip tube) with floater and filter- Red Ball Cap for FermZilla, Carbonation Cap- Yellow Ball Cap for FermZilla, Carbonation Cap

Ball coupling with integrated Duotight 6.35mm (1/4") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling. For hoses with 1/4" outer diameter.

Ball lock disconnect with integrated Duotight 6,35mm (1/4") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling.

Manometer Low Pressure 0-100 psi for CO2 - 1/4" NPT. Spare part for CO2 regulator. Manometer for reading the pressure into the regulator. Measures 0-7 bar (0-100 psi).This is the same pressure gauge that comes fitted to the MK4 regulator from Kegland. The pressure gauge fits most CO2 regulators with 1/4" NPT thread. Please note that these regulators have left-hand threaded pressure gauges. Then this one will not fit.

Manometer Low Pressure 0-4500 psi for CO2 - 1/4" NPT. Spare part for CO2 regulator. Manometer for reading the pressure into the regulator. Measures 0-300 bar (0-4500 psi).This is the same pressure gauge that comes fitted to the MK4/MK5 regulator from Kegland. The pressure gauge fits most CO2 regulators with 1/4" NPT thread. Please note that these regulators have left-hand threaded pressure gauges. Then this one will not fit.

The easiest way to make clean fast cuts in EVA-Barrier tubing. Perfect for use with John Guest, duotight, pushfit, fluidfirt, Sharkbit, DM Fit and other push in tubing brands. CUTS IN SECONDS: For clean, straight cuts this 2 in 1 cutter is an integral tool in the easy-to-install Duotight Connection System. COMPATIBLE WITH ALL POLY TUBING: For clean, straight cuts, use with 1/4 Inch, 5/16, 3/8 Inch, 6mm-10mm OD Tubing.  Compatible with HDPE, PE, PEX, PP NYLON, EVA, and EVABarrier tubing. This 2 in 1 tube cutter has two functions. The reverse of the tube cutter has an 8mm jaw that can be used to pull the collet back on the various Duotight fittings that we sell. The tube cutter itself has hardened and extremly sharp blade that makes nice clean and square cuts on tubing. This is also perfect for using with the Duotight fittings.

Trapets Adaptor. Tired of losing gas every time you connect or disconnect your sodastream cylinder to your normal sodastream cylinder adaptor. This new design is what you need. Unlike our cheaper sodastream cylinder adaptors, this adapter has the added advantage that you can use the side thumb screw to depress the pin in the middle of the adaptor.  This pin adjustment makes the sodastream cylinder adaptor significantly easier to use. Normal sodastream adaptors require an alan key to adjust the pin height and depending on how worn out your seal is you may need to adjust this pin periodically.  Also conventional cheaper sodastream adaptors also tend to leak gas every time you connect and disconnect them from your regulator or the adaptor itself.  This is also a pain.  This new sodastream adaptor design is significant better designed with the handy thumb screw on the side of the unit allowing you to eliminate cumbersome adjustment and it also gives you the ability to turn off and on the gas flow. This adaptor is used if you have a SodaStream Cylinder and wish to use a conventional Type 30 Regulator with it, perhaps for bbq or picnic and you don't want to carry your 6kg or 2.6kg Gas Cylinder this is the adaptor that will enable you to make a handy portable system. Ideal for the low volume user or someone who hasn't bit the bullet in a big cylinder. *does not include regulator or gas canister

The KegLandHeat Resistant Gloves / HIZO Oven Mitts are as impressive as they are functional with the ability to handle contact with temperatures of up to 500° Celsius (932°F). NON SLIP. This means that it is perfect for use with oven baking, hot pots, grilling, barbecuing, and woodstoves. Fashioned with high-quality aramid fibers which work to insulate and protect hands from burning temperatures, these gloves have a comfortable cotton and polyester lining which allows for breathability to resist sweating and a gauntlet-length style of design to protect wrists and forearm from scorching heat as well. These gloves are thick to provide excellent thermal protection and durability, but they are lightweight for extended use without fatigue. Sizing: Medium - sorry sausage finger friends :( hopefully a Large and XL to come soon. With heat resistance up to 932F (500C°), these gloves are perfect for: Perfect for oven baking, hot pots, grilling, barbecuing, and woodstoves.Adjusting logs in the fireplaceTouching scorching hot utensils or food while boiling or fryingChanging light bulbsHigh-quality aramid fibers for insulation and cotton and polyester liningDesigned for mobility and flexibility in mindFood-grade silicone layerMachine-washable, and can be easily hung on the line to dry.

This fantastic product has been designed by KegLand so you can dispense kegs on the run.  Don't bother bringing people to the bar, now you can take the kegs to the people. This awesome keg backpack is the only one of it's type in Australia and it's exclusive to KegLand. Cylinder, keg, and regulator sold separately. The JetKeg is an exclusive KegLand product that enables you to walk through a crowd and dispense a whole keg in far less time than what it would take for each person to come up to the bar.  It's a backpack designed to dispense and keep a keg cold. Great for parties, public events, caterers, or any even that requires many drinks to be dispensed in a short period. Ever been to a music festival and wanted to take your awesom kegged product but cant be bothered luging around all the gear.  The JetKeg solves this problem.  Turn up to the event with one of these and you will be an instant legend. This product has been designed with durable buckles, strong nylon straps, waist strap and fully hot tape seamed internal lining that is waterproof so no dripping water all over the floor. JetKeg Pack Includes:1 x JetKeg Back Pack1 x Black Nylon Pluto Gun (duotight compatible)1 x 6.5mm x 8mm duotight reducer (for pluto gun)1 x PreCut length of 4mm x 8mm EVABarrier HoseDoes not include gas fittings or disconnects/coupler This product has been designed to take a 19L Corny Brewing Keg or a 20L commercial keg (pony keg) which are sold searpately.

This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of the devices listed above. By receiving multiple BLE thermometer sensors the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillation process.  For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc. The Google Play Android App can be downloaded via the link below.https://play.google.com/store/apps/details?id=io.rapt The Apple App Store RAPT App can be downloaded via the link below.https://apps.apple.com/th/app/rapt/id1573192994"This app is a web mobile wrapper that allows you to browse the RAPT portal/website so that the website renders into a mobile device screen increasing usability on your device.  It also gives you the added functionality of push notifications to your mobile device This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of the devices listed above. By receiving multiple BLE thermometer sensors the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillilation process.  For example a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature etc. RAPT ConnectivityThe new Bluetooth thermometer can connect up to your BrewZilla Gen 4, RAPT Temperature Controller, RAPT Fermentation Chamber and log that temperature data and manipulate fermentation/brewing and distillation profiles in the RAPT Portal (https://app.rapt.io/).  This greatly reduces the need for handwritten records of your brew day as it's all done automatically.  The RAPT portal also allows you to see every brew you have done in the past with logged temperatures from the main units probe and this digital thermometer. This unit can also be setup to get push notifications to your mobile phone of when to sparge for example.Along with this ease of access and control. The RAPT BrewZilla will also allow you to fully customise your brewday with profiles specifically tuned to your style of brewing or your recipe.For example, you could set up step mash profiles using the core temperature of your mash instead of the cavity below where the probe is.Greater accuracy for a more repeatable recipe that results in much better beer! Specifications:20cm Probe Length with sharp tip~ Please remove the black plastic tip before use. That is for storage to avoid punctures / injury.100cm Cable LengthMagnetised Backing Plate (Orange)2 x AAA Batteries (included) Please note, the LCD display and button are not water resistant. If you get liquid into these areas it may damage the accuracy / visibility.

Jazz up your clear Kegland RAPT Pill Hydrometer and Thermometer with this RED coloured Pill housing allowing you to quickly customise and differentiate your RAPT Pills. This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other. Does not include clear Pill Housing and double o-rings shown in the images RAPT Pill circuit board sold seperately.

Jazz up your clear Kegland RAPT Pill Hydrometer and Thermometer with this GREEN coloured Pill housing allowing you to quickly customise and differentiate your RAPT Pills. This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other. Does not include clear Pill Housing and double o-rings shown in the images RAPT Pill circuit board sold seperately.

Jazz up your clear Kegland RAPT Pill Hydrometer and Thermometer with this BLUE coloured Pill housing allowing you to quickly customise and differentiate your RAPT Pills. This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other. Does not include clear Pill Housing and double o-rings shown in the images RAPT Pill circuit board sold seperately.

Upgrade your 65L BrewZilla Gen 4 with the all new barbed magnetic driven pump. This pump comes standard with the 100L BrewZilla Gen 4. This model was once a Green Demon (Green Colour), it has now been switched over to a Grey Goblin (Gun Metal Grey Colour). To upgrade the 65L BrewZilla Gen 4, you will need to perform some light electrical terminal rewiring. This pump comes prefitted with blade and circle connectors to swap out the standard 6 watt pump. You will need to re-use the grommet fitting so be gentle when taking it off the 6w pump. Please see product photos for particular configurations, standard config using ball valve, or Oli's Hail Mary configuration (braided hosing sold separately). Standard Configuration - No additional fittings/hoses requiredThis configuration is a direct swap out of the 6w pump to the 25w pump. Utilising the tee splitter and the original hosing that comes with the 65L Gen 4 BrewZilla.It does help a little bit if you use the outlet elbow piece on the inlet, and vice versa as the 25w pump is slightly taller than the 6w stock standard pump. Alternative Configuration ~ Oli's Hail MaryFor this method you will need about a 165mm piece of 12mm ID hosing, preferably braided. You cannot use normal silicone hosing for this. This method does not use the tee piece of ball valve. It solely relies on the bigger 25w pump to do all of the transferring/recirculating needs.Please see product photos for configuration types. This pump can also be used around your brewery, but you will need an electrician to fit a 10a plug to it. Capable of withstanding temperatures up to 120C it can handle the boil directly without the need to cool before use. Extremely efficient 1.1amp pump which can be run continuously at elevated temperatures.  Specifications:Voltage: 220-240 at 50-60hzMax Head: 3.4mMax Flow: 19L/minWiring: Fork and Ring Connectors fitted with insulation sheath.Fittings: 13mm Male BarbNOTE: Like almost all centrifugal pumps, do not run this pump dry.

This 10kg scale with 1 gram increments scale is perfect for measuring out hop additions accurately as well as yeast for those brewers who buy in bulk. Compact Size, perfect for measuring hop and yeast additions. Digital LED DisplayAuto Switch Off, Also with "On/Off" Button for Manual Control to Save Battery LifeThe High Precision Function Offers a Large 10000g Capacity with Precise 1g AccuracyPackage Includes:- 1 x Case- 2 x AA Batteries- Manual in English.

Clean bottles and carboys in seconds! Great for Brewers, Winemakers, Cleaners and more! Fits 3/4" and 1/2" fittings. Attach the washer to a laundry rub faucet and the bottle washer is ready to work.

Spare part. This is a safety device for KL06972 Mini Keg Tapping Head Kits. It has a 1/4" BSP threaded bottom to Cornelius Pressure Relief Valve thread type on top.

The perfect pocket kit for brewday, we wouldn't leave home without one! Either weigh out your salts bare knuckled on the stainless steel pad, or use a small cup and TARE to zero. Ideal for adjusting your pH with brewing salts, as well as measuring out your hops and granulated whirlfloc. Adjusting your pH with brewing salts has never been easier than with this tiny pocket rocket scales. Flip the lid and get weighing because we wouldn't start brewday without one. Using reverse osmosis water as a base point, you will undoubtedly be adjusting your water profile to suit your style or region. Do yourself and favour and pick up one of these on your next order, well worth it to be accurate on brewday. Specifications:- Powered by 2 AAA batteries (batteries not included)- Durable and compact digital pocket scale for easy portability- Weighs items up to 1000 grams in 0.1 gram increments- Easy-to-read, backlit LCD display; intuitive, flip-open lid protects the smooth, stainless-steel weighing surface

High Quality Polyester Bag 63 micron mesh with 25mm Webbing. These polyester bags are strong and resilient! Made to line a pot up to 55cm in Diameter, the bags actual dimensions are 800mm wide by 550mm deep and are suitable for boiling as well up to 110C.

Feeler Gauge with 17 blades - Used to check the distances between the rollers in a malt crusher, or distances on other devices. The leaves are 9 cm long and combined to achieve the desired thickness. For example: 1.00 mm + 0.30 mm to measure and opening of 1.3 mm. The blades can be lubricated with thin protective oil from the factory. If necessary, dry it a little before use.Material: carbon steel (carbon steel).  The thickness of the 17 blades: 0.02 mm0.03 mm0.04 mm0.05 mm0.06 mm0.07 mm0.08 mm0.09 mm0.10 mm0.15 mm0.20 mm0.25 mm0.30 mm0.40 mm0.50 mm0.75 mm1.00 mm

Now you can very easily make a mini-keg from an ordinary PET bottle! With these couplings it becomes like a barrel with ball lock couplings and you can transfer the whole end, as if it were a cornelius barrel. Ingenious as a simple growler or for example for cleaning the tap line without needing an empty keg. PET Ball Lock Kit contains:- two plastic ball lock couplings for PET threads- a T-piece (Carbonation Cap Tee Adapter) for PET- a silicone hose of 30 cm.The ball lock couplings work for both beer and gas (CO2).  (bottles not included)

Top-shelf polyester brew in a bag (BIAB) featuring 65-micron mesh with 1-inch reinforced Webbing.  70cm x 85cm. BIAB - top-shelf polyester brew in a bag (BIAB) featuring 65-micron mesh with 1-inch reinforced Webbing.  The bags are 70cm x 85cm making them large enough to use in even pots that are 60 litres and over! Suitable for boiling as well up to 110C.

Quick Swivel Connector from 1/2" NPT Female to 3/8" (9.5 mm) pushfit / duotight. Made of stainless steel with a robust silicone grip all around so you can use the nut without tools.

Quick Swivel Connector from 1/2" NPT Female to 1/4" (6.35 mm) pushfit / duotight. Made of stainless steel with a robust silicone grip all around so you can use the nut without tools.

Quick Swivel Connector from 1/2" NPT Female to 5/16" (8 mm) pushfit / duotight. Made of stainless steel with a robust silicone grip all around so you can use the nut without tools.

Quick Swivel Connector from 1/2" NPT Female to 1/2" (13 mm) hose barb. Made of stainless steel with a robust silicone grip all around so you can use the nut without tools. Fits most pumps with 1/2" thread.The KegLand Stainless Steel Quick Connectors in 1/2" Female NPT come with a heavy duty silicone grip guard allowing comfortable and quick tool-free operation. These are ideal for the BrewZilla, DigiBoil ball valves and any and all half inch fittings like the 25 watt magnetically driven pumps. Features:- Stainless steel and silicone construction- High temp silicone grip provides a cool touch even with hot liquids!- Ribbed grips allow quick comfortable tool-free operation- Silicone o-ring seal is retained for perfect positioning but is easily cleaned or replaced- Fits all male 1/2" NPT and BSP fittings as it is a parallel thread.- 13mm Stainless Steel Barb tail with 10mm ID Bore

Heavy duty brewing gloves, ideal for cleaning around the brewery or even the home. Seriously long for getting those arms deep into Kegmenters, Fermentasaurus' and those Large and In Charge Brew Pots. Heavy Duty Vulcanized Latex Brewing Gloves - 55cm LongThese heavy duty brewing gloves are made from vulcanized latex, ideal for cleaning around the brewery or even the home. Seriously long for getting those arms deep into Kegmenters, Fermentasaurus' and those Large and In Charge Brew Pots.Tough chemical resistant material provides good protection to your hands during clean-up and sanitary handling of equipment.  55cm long so will also protect the forearm when reaching into harsh cleaning chemicals.

Brand new Hop Sock design, suited for dry hopping or steeping hops in the boil. If you have a Heat Exchanger, we would highly recommend bagging your hops if you're going to do a NEIPA or DIPA, as it may clog your plates or even your pump! Rated up to 110C it is the perfect tool for an easier clean up regime. This can also be used to steep malted grain, or literally anything you need to use like a tea bag. Re-usable, we recommend soaking in a Sodium Percarbonate mixture then a machine wash. Customise your hop sock with this "Tie The Knot" Hop Sock, cut it in half, thirds, fourths. Then simply tie the end, bag up your hops/spices tie again and drop them into your boiler, fermenter or even a modified radler. This can also be used to steep malted grain, or literally anything you need to use like a tea bag. Dimensions:150mm wide800 mm long (we recommend cutting in half and tying each end like a sack, or use as long tube) Tip and tricks, tie hops with double the amount of space like a half empty sack (expansion/absorption). Then tie unscented floss to the end and hang with a clip/clamp in your boiler/kettle or fermenter. Keeps it from touching the bottom and clogging ball valves or pumps.

Brand new Hop Sock design with far stronger stitching all the way around. Suited for dry hopping or steeping grain or spices in the boil. If you have a Heat Exchanger, we would highly recommend bagging your hops if you're going to do a NEIPA or DIPA, as it may clog your plates or even your pump! Rated up to 110C it is the perfect tool for an easier clean up regime. This can also be used to steep malted grain, or literally anything you need to use like a tea bag.  Dimensions:130 x 580 mm

Hose Clamp Butterfly Stainless Steel Adjustable 14-25mm

Hose Clamp Butterfly Stainless Steel Adjustable 10-16mm

This 10 cm handy spring clamp has been the tool of choice for many KegLand employees to hold the malt pipe silicone hose in place during the mash. This clamp features a heavy-duty muslin spring which ensures your silicone hose never accidentally pops out of your mash tun and spills your prescious nectar over your brewery floor. It features rounded handles for a comfortable grip and a PE end grip to ensure your hosing is kept secure. This clamp is made from PP and PE which have good chemical resistance so it will stand up to the task for use around common brewing cleaners and sanitisers. These spring clamps have a multitude of potential uses throughout your brewing outside of securing silicone hosing.

FermZilla Heating Wrap Belt 30W- With Velcro Strap (30watts) Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty. Punching in at an ample 30 watts, this heating wrap belt is great when paired with insulation and a temperature controller box to dial in that optimum fermentation profile. 30W220-240V Dimensions:1000mm x 250mm

RAPT Pill - Clear Housing (Male Threaded - Bottom Piece). Replace your RAPT Pill bottom housing with the RAPT Clear Housing shell. Please note there are no clear top pieces for the RAPT Pill at this stage.

Connector Hex Nipple Threaded 3/8" BSP to 3/8" BSP (NPT) Stainless Steel. Fits both BSP and NPT threads.

Connector Internal Threaded Pipe Socket 3/8" BSP (NPT). Stainless Steel. Fits both BSP and NPT threads.

Connector Hex Nipple 1/2" BSP to 1/2" BSP Stainless Steel. Can be fitted both to BSP and NPT threads.

Connector Internal Threaded Pipe Socket 1/2" BSP (NPT). Stainless Steel. Fits both BSP and NPT threads.

Ball coupling with integrated Duotight 9,5mm (3/8") quick coupling. Ingenious ball coupling from kegland means you don't have to choose between hose clamp or quick coupling with threads. Now there is finally a ball coupling in really good plastic material that better resists chemicals and has a built-in quick coupling. For hoses with 9,5mm outer diameter.

Kegland EVABarrier 8 mm (5/16") double walled tubing EVA outer wall and an inner proprietary polymer barrier. 4mm (5/32") inner diameter and 8mm (5/16") outer diameter. Fits Kegland and Duotight 8mm products and pushfit.Pressure Rating (with 1.5 safety factor)30 grader Celcius - 1.4 MPa (200psi) = ca 13 bar50 grader Celcius - 0.7MPa (100psi) = ca 6,5 barPlease Note: Sold per meter, so if you choose 2 in the select box you will get 2 meters of hose. Measurements may differ circa +/- 10mm.

This kit has been designed for simplicity and ease of putting together. If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job. The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure. This BlowTie unit can be easily dissassembled for cleaning using a phillips head screw driver. Designed to suit 8mm (5/16") Evabarrier Tubing.  It's compatible with both the 4mm ID Tubing here or 5mm ID here. Specifications:1. Suits pressures 0-60psi (but with different guages the unit can go above 100psi)2. Made from food grade acetal3. Stainless screws4. 8mm (5/16") push on both sides

Tap Adaptor Duotight - 9.5mm (3/8”) Pushfit x 5/8” Female BSP Thread. Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with: - EVABarrier 6mm ID x 9.5mm OD line- PE-tubing 3/8" (9,5mm) No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Tap Adaptor Duotight - 9.5mm (3/8”) Pushfit x 1/2” Female BSP Thread. Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with: - EVABarrier 6mm ID x 9.5mm OD line- PE-tubing 3/8" (9,5mm) No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Tap Adaptor Duotight - 8mm (5/16”) x 5/8” Female BSP Thread. Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with: - EVABarrier 6mm ID x 9.5mm OD line- PE-tubing 3/8" (9,5mm) No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

Achieve quick and fast gravity readings of your homebrewing in three specific scales at high ranges, SG Sugar, BRIX and SG Wort. Getting fast, accurate, and reliable readings during all-grain brewing is essential to getting the best possible efficiencies. Refractometers help you achieve this and can speed up your brew day significantly. Now in a water-resistant design that is rechargeable! This model also features ATC (automatic temperature compensation). This high-quality refractometer is extremely accurate and easy to use and calibrate. Calibration is simply done with a few drops of distilled water and the use of a flat head screwdriver. Comes with:Carry caseRed Magnetic Charging USB Charging Cable (AU plug not included) Calibrate Steps:1. Add 10 drops of clean filtered water (preferably deionised water) to the refracted sample end of your Refractometer. 2. Either in direct sunlight or using the LED, observe the blue shaded area. Does it read 1.000? If it is higher or lower, you will need to use a flat headed screwdriver and adjust the underside of the Saber Refractometer so that it reads 1.000.

Charge your Pill wirelessly with this easy-to-install upgrade kit from KegLand. The RAPT Pill is a Wifi & Bluetooth hydrometer for logging fermentation to the cloud. No need to take your RAPT Pill housing apart for charging! Or even to connect to the RAPT Captive Portal. Includes:1 x USB-C Wireless Charging Coil2 x Adhesive Weight Pads1 x USB-A to USB-C cord (AU power plug not supplied)1 x Black RAPT Wireless Charging Dock (USB-C)If the green light does not flash green (captive portal open), it means your battery is insufficiently charged. Leave your pill on the charging pad for 24 hours or until it is fully charged (red light turns off). Then lift the Pill on and off the charging pad and it will activate the captive portal (green light will start to flash).See video below how to update your Pill:

The Icemaster G20 Glycol Chiller is a perfect solution for precise temperature control. With powerful cooling, dual independent pumps, and a compact design, it’s perfect for home brewers and small-scale breweries. From chilling wort to maintaining fermentation temperatures and crash cooling, this chiller ensures consistency and quality in every batch. It can also control heating devices using the onboard controller with some modification.See videos down the page. - Dual Temperature Control: Independently chill two fermenters with integrated pumps and precise digital controllers.- Efficient Cooling Power: 500-watt compressor and R600a refrigerant deliver reliable performance with low energy use.- Compact Design: Small footprint and durable build fit seamlessly into home or small brewery setups.- Large Glycol Capacity: 16.42-litre tank supports effective cooling for wort chilling, crash cooling and fermentation.- Precise Temperature Control: Maintain exact fermentation temperatures for perfect brewing results.SpecificationsRefrigerant: R600a (Isobutane)Cooling Power: 500 watts (0.67 HP)Power Consumption: 155 wattsTank Capacity: 16.42 litresMaximum Head (Per Pump): 5 metresMaximum Flow (Per Pump): 600 litres per hourOutput Barb Size: Compatible with 10 mm inner diameter tubing (ca 3/8")Dimensions: 510 mm x 300 mm x 460 mm (L x W x H)Weight: 25 kgPRODUCT MANUALClick here to open This glycol chiller features 500 watts (0.67 HP) of cooling power, rated at an ambient temperature of 22°C, ensuring reliable operation even in warmer conditions. It is powerful enough to chill well-insulated fermenters up to 200L in size or multiple smaller fermenters.Using environmentally friendly R600a isobutane refrigerant, the Icemaster G20 Glycol Chiller offers exceptional cooling efficiency while maintaining eco-conscious standards. Equipped with a 16.42-litre tank, the chiller works optimally with a glycol-water mixture (20-30% glycol concentration) to achieve a freezing point of approximately -8°C. This ensures the perfect balance of heat transfer efficiency and freeze protection, making the glycol chiller ideal for a wide range of brewing needs, from chilling wort to maintaining fermentation temperatures.

The NukaTap Mini is designed for home brewers and portable draft systems, offering a controlled flow rate to reduce foaming and ensure a smooth pour. Its compact size makes it ideal for mini keg setups, fitting easily into tight spaces like domestic fridges.NOTE: Tap only, for connection kit, see below. Key FeaturesForward Sealing Technology: Ensures sanitary operation and reduces maintenance.Superior Laminar Flow: Minimises beer wastage and foam.Durable Construction: Made from robust POK and Santoprene® materials.Low First Pour Foam: High insulation properties keep the tap cool.Versatile Installation: Easy to set up and compatible with various systems.Experience the perfect pour every time with the NukaTap Mini, combining innovative design with practical functionality for all your brewing needs.For measurements, see images. Most conventional beer taps are designed with 10mm diameter nozzle/spout so you can pour pint in just over 10sec.  This type of flow rate is great for high turnover bars and commercial venues but this high flow rate requirement is not not necessary or desirable for all applications.  For compact portable systems, or for home brew draft systems a slower flow rate is easier to control the flow and further reduces foaming issues due to the low liquid volume stored in the tap body.  This Nukatap mini is also more idea for pouring smaller doses.  For examples cocktails where 150-250ml of liquid is dispensed is difficult to control with a high flow rate tap.  For portable systems this tap and FC ball lock disconnect assembly is small enough to literally put in your pocket making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight.

This duotight 8mm (5/16") adaptor is designed to suit the Nukatap Mini and will allow couple your Nukatap mini to a wide range of other 8mm(5/16") duotight fittings or alternatively be able to attach to a Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adaptor.  The combination of the two fittings prevents the tap spinning around while in use. Note: kit contains no Nukatap or ball lock disconnect.

NukaTap Mini Wall Mount Shank Kit - Duotight Adaptor 8mm (5/16"). Note: kit contains no Nukatap or ball lock disconnect.SPECIFICATIONSBeer Line Diameter: Suits any EVABarrier beer line in with 8mm ID Beer line such as the 4mm x 8mm EVABarrier beer line or the 5mm x 8mm EVABarrier beer Line.Collet and Screw Cover: 304 Grade Stainless SteelO-ring Material: Dual o-ring Silicone/EPDM combinationPlastic Mounting: POKTemperature Range: -10C and up to 100CMax Pressure: 150psi