Brewing products

Mix & Match: Buy 2 or more, any mix
The price drops on every product in the offer. The discount is applied automatically.
Show only Mix & Match
Fluidfit HCF1/4-G06G - 1/4" Pushfit to 3/4" BSP Thread

Fluidfit HCF1/4-G06G - 1/4" Pushfit to 3/4" BSP Thread

Fluidfit® HCF 1/4" push-fit connection with female 3/4" BSP thread.

€5,5
Duotight Adaptor - 6.35mm (1/4”) Pushfit to 3/4” BSP Thread

Duotight Adaptor - 6.35mm (1/4”) Pushfit to 3/4” BSP Thread

Tap Adaptor Duotight - 8mm (5/16”) x 5/8” Female BSP Thread. Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design. Why do we use Double O-rings?The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly. The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market. Compatible with: - EVABarrier 6mm ID x 9.5mm OD line- PE-tubing 3/8" (9,5mm) No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

€3
Gas Distributor - CO2 Manifold 2-way 1/4" MFL

Gas Distributor - CO2 Manifold 2-way 1/4" MFL

Gas Manifold - CO2 Manifold 2-Way 1/4" MFL - can be used to connect two kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves. The input and outputs have MFL threads. These are compatible with quick connectors with FFL threads from DuoTight and John Guest, among others.(Hint: MFL stands for Male-, FFL stands for Female-). - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) MFL (fits 7/16" - 20UNF FFL).- Behind the MFLs there is a 1/4'' thread for e.g. ball locks with MFL thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

€26
€23
Gas Distributor - CO2 Manifold 4-way 1/4" MFL

Gas Distributor - CO2 Manifold 4-way 1/4" MFL

Gas Manifold - CO2 Manifold 4-Way 1/4" MFL - can be used to connect several kegs to a CO2 cylinder. Outlets can be closed and opened individually with built-in check valves. The input and outputs have MFL threads. These are compatible with quick connectors with FFL threads from DuoTight and John Guest, among others.(Hint: MFL stands for Male-, FFL stands for Female-). - Save money by using a single CO2 tank for multiple kegs.- Inlets and outlets are equipped with 1/4" (6.35mm) MFL (fits 7/16" - 20UNF FFL).- Behind the MFLs there is a 1/4'' thread for e.g. ball locks with MFL thread.- Integrated check valve outlets prevent fluid from flowing into the manifold and your regulator, and fluid migrating from one barrel to another.- No leaks due to thread tape and heavy water testing after installation- Body made of aluminium. Rest made of brass and stainless steel.- Mounting holes allow for easy installation on walls or kegerators.

€44
€42
Fluidfit HBVU Valve Connector 3/8" - 3/8"

Fluidfit HBVU Valve Connector 3/8" - 3/8"

Fluidfit HBVU Valve Connector. Pushfit. Also fits John Guest (JG) and Duotight.

€10
Fluidfit HBVU Valve Connector 1/2" - 1/2"

Fluidfit HBVU Valve Connector 1/2" - 1/2"

Fluidfit HBVU Valve Connector. Pushfit. Also fits John Guest (JG) and Duotight.

€10
Caps 29mm 100-pack White

Caps 29mm 100-pack White

29 mm crown caps (crown corks) for champagne and geuze bottles.

€5,5
Temporarily out of stock
View product
Caps 29mm 100-pack Silver

Caps 29mm 100-pack Silver

29 mm crown caps (crown corks) for champagne and geuze bottles. Looks may vary.

€5,5
Temporarily out of stock
View product
Pacific Jade Hops 50g 2025

Pacific Jade Hops 50g 2025

The aroma of this hop is described as “bold” as it delivers a herbal infusion of fresh citrus and crushed black pepper. Brewing trials have illustrated Pacific Jade as an excellent hop that delivers a pleasing soft bitterness matched to desirable aroma characteristics.Brewer’s notes: Suited for use as a bittering hop with some excellent results also being seen in dual purpose applications, with a soft bitterness attributable to the low cohumulone. The citrus aroma and flavour notes work well to temper malt sweetness in “fullish” Ales especially when used moderately as a finishing hop. Pacific Jade is also well suited to balance dryer Lager styles when employed as an “up-front” kettle addition to showcase its bittering qualities. “Displays great versatility in the brewhouse” Crop: See headingOrigin: Nya Zeeland Typical values: Alpha acid (correct alpha value is printed on the package): 11 - 15 %Cohumulone: 22 - 26 %Total oils: 1,4 ml / 100 gPossible replacements: Magnum, Pacific Gem

€4,2
€3,6 per piece when you buy 2 or more
Cascade IPA 6,5% Recipe Kit 20L

Cascade IPA 6,5% Recipe Kit 20L

Recipe kit 20 liters lovely IPA with Cascade hops. For those who have a brewery or other equipment for crushed malt. 

1 pc €47
2+ mixed €38/pc
Mix & Match · save €9 each
Weyermann Beech Smoked Malt 1kg Whole

Weyermann Beech Smoked Malt 1kg Whole

Unique, relatively mild smoked malt from Bamberg, Germany. The malt is dried with smoke from birchwood, which adds delicate smoke character with notes of charcuteries and low levels of vanilla. May be used at 100 % of the grain bill to produce typical smoked beer, or at lower percentages to add an interesting smoky quality to beers. Low in colour. Grain type: barleyColour: 4 - 8 °EBC (2,1 - 4 Lovibond)

€3,6
Bottle Filler Counter Pressure with Manometer (CO2 Gauge)

Bottle Filler Counter Pressure with Manometer (CO2 Gauge)

With this stainless steel bottlefiller, you can pour beer and other beverages directly into bottles from kegs and minimize exposure to oxygen by the use of foaming and flushing the bottle with CO2 first. Fits most types of bottles.Works best with cold liquid and with a pressure between 0.6 - 1.1 bar.For cleaning, use an alkaline cleaner (VWP, PBW or Chemipro OXI) and flush the bottle filler according to CIP (Clean In Place), then rinse through the back pressure filler with water.Then use a disinfectant (Sanipro or Star San) before use.Connect the CO2 hose from the regulator on one side and the beer hose on the other side.Barbs: 1/4" (ca 6,5mm)Straight Foam RElease valve: 5/16" (8mm)Length: ca 40.0cmWidth: ca 14.5cm

€94
€66
Temporarily out of stock
View product
Hose Clamp Butterfly Stainless Steel 21-38mm - Yellow

Hose Clamp Butterfly Stainless Steel 21-38mm - Yellow

Hose Clam Butterfly Stainless Steel, adjustable 21-38mm with plastic butterfly thumb screw. Yellow - Color may vary.

€1,5
Hose Clamp Yellow Butterfly Stainless Steel 25-44mm

Hose Clamp Yellow Butterfly Stainless Steel 25-44mm

Hose Clam Butterfly Stainless Steel, adjustable 25-44mm with plastic butterfly thumb screw. Yellow - Color may vary.

€1,8
Silicon Gasket for 3" Tri-Clamp

Silicon Gasket for 3" Tri-Clamp

This tri-clamp gasket, crafted from premium silicone, is designed to provide a secure, leak-free seal in tri-clamp (TC) fittings. Its beaded edge enhances the seal, creating a strong barrier that is perfect for maintaining hygiene in brewing, distilling, and food processing environments. This durable silicone gasket is highly resistant to heat and chemicals, making it an ideal choice for demanding applications where reliability and cleanliness are essential. This tri-clamp gasket will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc. Key Features: Tri-clamp (TC) beaded seal for secure connectionsMade from high-quality, food-grade siliconeExcellent resistance to heat and chemicalsDesigned for brewing, distilling, and sanitary applicationsEnsures a leak-proof seal for optimal hygiene and efficiencyTemperature Range:-54°C to 200°C Perfect for any setup requiring secure and sanitary connections, this silicone beaded seal is an essential component for ensuring smooth and reliable operations.

€1,8
Cap for 1,5" Tri-Clamp (TC)

Cap for 1,5" Tri-Clamp (TC)

1.5” tri-clamp Cap and will fit any 1.5" tri-clamp connection Tri-clamp fittings, including the 1.5” cap, are celebrated for their quick clamp union, creating sanitary connections that are easy to assemble and disassemble. This feature significantly enhances the efficiency of your cleaning and maintenance processes, a key factor in producing high-quality craft beers. AISI 304 stainless-steel.Easy to clean.Easy to mount.Tri-clamp standard.

€2,7
Cap for 2" Tri-Clamp (TC)

Cap for 2" Tri-Clamp (TC)

2” tri-clamp Cap and will fit any 2" tri-clamp connection Tri-clamp fittings, including the 2” cap, are celebrated for their quick clamp union, creating sanitary connections that are easy to assemble and disassemble. This feature significantly enhances the efficiency of your cleaning and maintenance processes, a key factor in producing high-quality craft beers. AISI 304 stainless-steel.Easy to clean.Easy to mount.Tri-clamp standard.

€3,6
iTap Red Silicone Seal for Handle (item 24)

iTap Red Silicone Seal for Handle (item 24)

iTap Red Silicone Seal for Handle (item 24). Spare part.

€4,6
Temporarily out of stock
View product
Trisani Brew Grease 40g - Silicone based lubricant

Trisani Brew Grease 40g - Silicone based lubricant

Brew Grease is a food‑grade lubricant used to coat O-rings and gaskets in your brewing setup. It is NSF‑H1 certified for incidental contact with food and drink. It ensures that connections remain tight and leak-free — crucial for a successful brewing process. You’re at your brew stand, tools laid out, yeast bubbling away in your fermenter and you know how every snug connection matters. Even the smallest O‑ring or seal, if dried, cracked or unlubricated, can create a leak that wastes wort or sends pressure escaping. That’s why Brew Grease becomes part of your ritual, an unsung hero that quietly makes sure your fittings stay tight, seals stay soft, and your brew day stays on track. Benefits of Beer GreaseHigh Quality: Food-safe and approved for use in brewing systems.Extends Lifespan: Helps reduce friction and wear, prolonging the life of O-rings and seals.Tight Sealing: Keeps your connections leak-free and secure.Easy to Apply: Smooth and easy to use on seals and O-rings for optimal performance.Versatile Use: Suitable for various types of seals and fittings in your brewing system. A Unsung Brew Hero You’re at your brew stand, tools laid out, yeast bubbling away in your fermenter and you know how every snug connection matters. Even the smallest O‑ring or seal, if dried, cracked or unlubricated, can create a leak that wastes wort or sends pressure escaping. That’s why Brew Grease becomes part of your ritual - an unsung hero that quietly makes sure your fittings stay tight, seals stay soft, and your brew day stays on track. How to ApplyClean all connections and dry thoroughly.Gently rub a small amount of Brew Grease around each O‑ring, gasket or fitting. Think of it as seasoning your rubber parts, not flooding them.Assemble your system carefully; seals should seat easily - not stretch or slip.Reapply before extended brew sessions, or when disassembling for cleaning or storage.

€11
Mini Keg Lid with Ball Locks, PRV and silicone hose

Mini Keg Lid with Ball Locks, PRV and silicone hose

Lid for stainless steel Mini Kegs with two ball lock connectors (liquid+gas), a PRV Pressure release valve and 30cm silicone hose. Perfect for connecting beverage hose and carbonation hose via the ball-lock ball connectors. Contains:- Mini Keg Lid with Ball Lock and PRV- 30 cm (11.8'') silicone hose- Extra Replacement O-ring kit Material: Stainless steelSize: 78mm*55mmThread size lid: 33.5*1.5

€33
€28 per piece when you buy 2 or more
Mini Keg Spear Lid with Tap Thread, Gas Ball lock and PRV

Mini Keg Spear Lid with Tap Thread, Gas Ball lock and PRV

Spear Lid for stainless steel Mini Kegs with a G5/8 tap connector, one ball lock connectors (gas), a PRV Pressure release valve and 30cm silicone hose. Perfect for connecting beverage tap and carbonation hose via the ball-lock ball connector. Contains:- Mini Keg Spear Lid with G5/8 tap connector, gas Ball Lock and PRV- 30 cm (11.8'') silicone hose Material: Stainless steelThread size lid: 33.5*1.5

€33
€28 per piece when you buy 2 or more
Tap Faucet Adjustable with Ball lock - Short Handle

Tap Faucet Adjustable with Ball lock - Short Handle

Tap Faucet with short handle, adjustable flow, and Ball lock connector (included), and the G5/8" connector. 304 stainless steel, Chrome plated body. This ultra-durable material won’t pit or tarnish, and you’ll never have to worry about your beer being tainted by a gross metallic taste. You can use this lever to adjust the flow rate of beer to avoid excess foam. This is especially useful for hard-to-pour beers, if you’re serving a wide variety of styles, using frosty mugs, or serving sampler glasses. Connect it directly to a beer or soda keg .Use this keg faucet adapter assembly to make your keg more portable (or just to get away from that picnic tap). Directly use the liquid ball lock post on the corny keg.

€22
Temporarily out of stock
Expected in stock: 2026-12-10
View product
-7%
Ball Lock Stainless Disconnect Threaded 1/4" MFL Black for Beer/Liquid

Ball Lock Stainless Disconnect Threaded 1/4" MFL Black for Beer/Liquid

Stainless Self-closing quick disconnect for ball lock cornelius kegs. Black coupling that fits on the liquid/beer post. Threads: 1/4" MFL (corresponds to 7/16" UNF). Stainless Steel 304.

€14
€13
-7%
Ball Lock Stainless Disconnect Barbed Black for Beer/Liquid

Ball Lock Stainless Disconnect Barbed Black for Beer/Liquid

Stainless self-closing quick disconnect for ball lock cornelius kegs. Black coupling that fits on the liquid/beer post. Barb: 6.5 mm (1/4"), also fits 5/16".

€14
€13
Bucket Lid Opener Yellow

Bucket Lid Opener Yellow

Bucket Lid Opener Yellow is made from durable plastic and used to open lids on many types of bucket lids.

€4,6
BIAB Cylinder Brew Bag Nylon D24xL35 cm

BIAB Cylinder Brew Bag Nylon D24xL35 cm

This cylindrical nylon brewing bag (BIAB, Brew-In-A-Bag, mash bag, filter bag) with circular ribs fits well in pots and pans with a diameter of less than 24cm. Mesh size (mesh): 30. Nylon is stronger than polyester, which many other brewing bags are made of. When you mash, the brewing bag encloses the malt so that it can be easily lifted up and leached out afterwards. Can also be used as a hop boiling bag, however, the bag must never touch the hot bottom of the kettle/brewery. SizeDiameter (cylinder): 24 cmLength (height/depth): 35 cm MaterialStrong, durable and coarse-mesh nylon, easy to clean. BPA-free. Note: Kettle is not included.

€17
Tap Valve Stainless 1/2" - 3/8" Barb & 1/2’’ NPT Thread

Tap Valve Stainless 1/2" - 3/8" Barb & 1/2’’ NPT Thread

Stainless steel tap, mainly for kettles. Rubber-covered handle with auto-lock function. Made of 304 stainless steel. Outlet:  3/8" barb (10mm) & 1/2’’ NPT ThreadInlet: 1/2" with 1/2" nut and silicone gaskets Fits 7/8" (23-23mm) hole in the pot.

€24
€19
Tap Valve Stainless 1/2" - 1/2" Female & 1/2’’ Male Thread

Tap Valve Stainless 1/2" - 1/2" Female & 1/2’’ Male Thread

Stainless steel tap, mainly for kettles. Rubber-covered handle with auto-lock function. Made of 304 stainless steel. Outlet:  1/2" Female ThreadInlet: 1/2" Male Thread with 1/2" nut and silicone gaskets Fits 7/8" (23-23mm) hole in the pot.

€22
€17
Counter Flow Chiller Copper 10m 3/8"

Counter Flow Chiller Copper 10m 3/8"

Copper counter-flow chiller cools the wort by running cold water counter-currently in a hose around a stainless steel tube with the wort.solids. The connectors are approximately 9.5 mm (3/8") outer diameter and fit 3/8" john guest/duotight/pushfit or hose with hose clamps. The cold water loop is black rubber. These can be used with gravity but are recommended to be used with a pump. This includes:- Counter Flow Chiller 10m copper

€122
€103
Australian Blend Vitt Slottsvin 23L (White Wine) 4-Day Kit

Australian Blend Vitt Slottsvin 23L (White Wine) 4-Day Kit

Australian Blend 4-Day white wine kit is a true classic in the world of fast fermented wines.With 4-Day Yeast kit: Wine Yeast, Yeast Nutrients, Stabilizer (E202, E224, Finings A (Kiselsol, Finings B (Chitosan), Allergens: Sulphites, Crustacea. Ingredients: Concentrate for grape juice, sugar, water, preservative E223

€31
Tri-Clamp TC 4”

Tri-Clamp TC 4”

This is a universal stainless-steel tri-clamp and will fit any 4" tri-clamp connection. It is easy to mount. This tri-clamp will fit many fermenters. AISI 304 stainless-steel.Easy to clean.Easy to mount.Tri-clamp standard. Gasket is sold separately.

€15
€14 per piece when you buy 2 or more
Hersprucker Weissbier 4,7% Recipe Kit 20L

Hersprucker Weissbier 4,7% Recipe Kit 20L

Recipe Kit for 20L classic German Weissbier with Hersprucker hops. Perfect if you have a brewery or other equipment for crushed malt.

€38
Cornelius Keg Lid with Liquid Corny Post + SS Float + 80cm Hose

Cornelius Keg Lid with Liquid Corny Post + SS Float + 80cm Hose

KegLand would like to introduce The Corny Floater! A modification some of our guys have done with the Carbonating Keg lid to make it suitable for super duper dry hopping. Or a convenient floating dip tube to had fruit puree to a keg that would surely block a standard stiff dip tube. Just like its brother from another mother, the plastic beast that we know as FermZilla with the floating dip tube. Now the 19L Kegs have a dedicated piece of equipment to mimick just that. Ideal for you Corny Fermenters out there as well, taking that clearest liquid from the top. Features: - 1 x Stainless Cornelius Keg Lid with feet for 19L / 9.5L Kegs- 1 x Grey 100psi PRV- 1 x Silicone Keg Lid O-Ring- 1 x Liquid Cornelius Bulkhead Post complete with poppet / spring and 8mm barb (pre-attached to lid)- 1 x 80cm Silicone Hosing- 1 x Stainless Steel Float- This keg lid DOES NOT HAVE Inside hook to attach hop bombs or a hop tube. Keg not included. 

€40
€38
Temporarily out of stock
View product
Washers EPDM 10-pack - 5/8" 15mm ID x 21.5mm OD x 3mm

Washers EPDM 10-pack - 5/8" 15mm ID x 21.5mm OD x 3mm

This is a EPDM 5/8 Washer which is suitable for Keg Couplers and Tap Shanks. (10 Pack) - 15mm ID x 21.5mm OD x 3mm. EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, wide variety of alkaline and acid compounds, water, alcohol, ketone and beverages. EPDM is also resistant to aging, weather and will not perish easily like other rubber compounds.   When compared with silicon and vinyl EPDM has better gas transmission rates, better wear resistance, is BPA free and is the number one choice for many long lasting food grade applications. Specifications:15mm ID x 21.5mm OD x 3mm

€4,2
T-connector Stainless with 10mm hose barb

T-connector Stainless with 10mm hose barb

T-connector Stainless with 10mm hose barbs

€4,6
Kegland Super Sucker - Siphon Pump (1/2" BSP) with Power Supply (EU-cord)

Kegland Super Sucker - Siphon Pump (1/2" BSP) with Power Supply (EU-cord)

The Super Sucker transfer pump is the quickest, most hassle-free solution to moving beer, wine, cider or spirits between vessels. Rack from the primary fermenter to secondary or from carboy to keg without the excess oxygen exposure that results from hand-pumping a siphon or blowing into a carboy hood. - Transfer beer, wine, cider and spirits between vessels without the hassle of starting a siphon.- Place your receiving vessel side-by-side or even above the transferring vessel.- Perfect for transferring between primary and secondary fermenter, or from fermenter to bottling bucket or keg.- Reduce excess oxygen exposure caused by hand-pumping or blowing into a carboy hood to start a siphon. Simply run transfer tubing from a racking cane to the pump and then to your receiving vessel, flip the switch, and let the Super Sucker do the work while you kick back and enjoy a cold one. With the Super Sucker you don't need gravity or CO2 pressure to move liquid around. Thanks to the pump's considerable max lift height, you can leave your heavy, full fermenter on the ground and place the receiving keg or carboy side-by-side or even above the fermenter on a countertop. The 1/2 Inch BSP inlet and outlet are perfect for use with 1/2 Inch push in fittings such as: monotight - 6.35mm (1/4") x 1/2" Female Threadduotight - 9.5mm (3/8") Female x 1/2" Female ThreadIt is important to remember to clean thoroughly and store dry to avoid potential sites of infection. We would recommend flushing/recirculating with a diluted mix of StellarSan for at least 2 minutes of contact time prior to using this pump.  Features:Self-Priming1/2 Inch BSP Inlet/OutletOn/Off SwitchMax Flow: 4.23 L/minSuction: 127mmMax Lift: 3.8mMaximum Temperature: 60°CPressure: 90 psiVoltage: 12V DC (3.5A)Power Cord Length: 1.2m (EU-cord)Power Adaptor Cord Length: 70cmPower Switch Cord: 25cm

€65
Temporarily out of stock
View product
Silicone Plug 17/13 mm with hole

Silicone Plug 17/13 mm with hole

Conical silicone plug stopper with hole. Cylindroconical form.Diameter Top: 17 mmDiameter Bottom: 13 mmHeight: 24 mmHole: 9 mm

€1,2
Silicone Plug 24/18 mm

Silicone Plug 24/18 mm

Conical silicone plug without hole. Cylindroconical form. Diameter Top: 24 mmDiameter Bottom: 18 mmHeight: 26 mm

€1,8
Silicone Plug 95/78 mm with hole

Silicone Plug 95/78 mm with hole

Silicone plug stopper for airlock with 9mm hole. Cylindroconical form.Diameter Top: 95 mmDiameter Bottom: 78 mmHeight: 45 mmHole: 9 mm

€10
Crisp Amber Malt 1kg Whole

Crisp Amber Malt 1kg Whole

This is the palest malt made using a roasting technique. After conventional kilning, the malt is dry and pale in colour hence it is known as “white malt”. It is transferred to our Speciality Malt Plant and passes through the roasting column where the flavour is transformed through the application of heat. The temperatures used through the column determine the colour and flavour of the roasted malt. Amber Malt is typified by a dry, toasted biscuit finish and can add an amber hue to the beer. Tasting Notes: Bold Malty backbone Intense biscuit aromas Dry Balanced toast flavours. Grain type: barleyColour: 60 - 80 °EBC (23 - 31 Lovibond)

€3,2
Weyermann Oak Smoked Wheat Malt 1kg Whole

Weyermann Oak Smoked Wheat Malt 1kg Whole

Produced from quality wheat. Carefully dried over hot, smoky ambers of well-aged oak wood to achieve characteristic, while preserving relatively pale color.  Flavor: mild, delicate, and well-rounded aroma of oak smoke; malty-sweet; notes of vanilla and honey. Grain type: wheatColour: 4 - 6 °EBC (2,1 - 3 Lovibond)

€3,8
Holiday Porter 6% Recipe Kit 20L

Holiday Porter 6% Recipe Kit 20L

Recipe Kit for 20L classic Porter. Perfect if you have a brewery or other equipment for crushed malt.

€42
Lallemand Belgian Wit Ale Yeast 11g

Lallemand Belgian Wit Ale Yeast 11g

LalBrew® Wit yeast is a relatively neutral strain which can be used to produce a wide variety of wheat beer styles. Ester and phenol production is lower than for traditional hefeweizen strains such as Munich Classic. LalBrew® Wit provides a baseline profile of banana and spice aromas, but leaves space for the brewer to showcase other spice additions typical of Belgian style beers. Traditional styles brewed with this yeast include but are not limited to Belgian Witbier, American Wheat, Berliner Weisse, Gose, Hefeweizen, Dunkelweizen, and Weizenbock. Flocculation: lowFinal gravity: mediumFermentation temperature: 17 - 22 °CStrainSaccharomyces cerevisiaeBeer stylesAmerican Wheat, Berliner Weiss, Dunkelweizen, Gose, Roggen/Rye, Weizen/Weissbier, Weizenbock, WitbierAttenuation75-82%Temperature range17 - 25°C (63 - 77°F)FlocculationLowAromaFruity, slight banana and cloveAlcohol tolerance12% ABVPitching rate50 - 100g/hL

€4,6
Pacifica Hops 50g 2025

Pacifica Hops 50g 2025

Pacifica displays classic Hallertau citrus and floral aroma character which selectors mark as a real standout. The aroma is supported by a generous oils profile making selection possible for several beer styles from this stylish hop.Brewer’s notes: The Pacifica brings something of a blend of new and old-world taste descriptors to the brewers' forum. Orange marmalade aptly describes the citrus aroma notes achieved through late addition. Bittering quality is such that early kettle additions net a soft yet solid finish even in highly bittered beers. Crop: See headingOrigin: Nya Zeeland Typical values: Alpha acid (correct alpha value is printed on the package): 4 - 8 %Cohumulone: 23 - 27 %Total oils: 1,0 ml / 100 g

€3,3
€3,1 per piece when you buy 2 or more
Rakau Hops 50g 2025

Rakau Hops 50g 2025

A high alpha variety with a good aroma. The bitterness is soft, thanks to the low cohumulone content. In late additions, Rakau gives aromas of tropical fruit, such as peach and passion fruit. Works great in IPAs where you want a soft hop profile. Also suitable for hoppy lagers, Belgian ales, or aromatic American wheat beers. Developed from New Zeeland's HortResearch in 2007. The variety was originally grown back in the 1970s where hops were grown from the older Smooth Cone hop variety. The hop variety was not released until 1983 and was then re-launched in 2007 under the name Rakau. Aroma: Very clear fruitiness where you can distinguish above all fresh apricot and passion fruit with notes of pine. Origin: Nya Zeeland Typical values: Alpha acid (correct alpha value is printed on the package): 9 - 13 %Cohumulone: 24 - 28 %Total oils: 1,8 - 2,2 ml / 100 gStorage stability (alpha acids): Very goodPossible replacements: Summit, Amarillo Crop: See headingForm: Pellets

€4,2
€4 per piece when you buy 2 or more
Southern Cross Hops 50g 2025

Southern Cross Hops 50g 2025

New Zealand hops with a fresh aroma with hints of lemon peel and spruce shoots. Southern Cross was produced by New Zealand's HortResearch hops development program in 1994. It is a cross between the New Zealand Smooth Cone and a research variety which in turn was a mix between a Cali and English Fuggle. Aroma: Lemon peel and spruce shoots with a clean spiciness. Origin: Nya Zeeland Typical values: Alpha acid (correct alpha value is printed on the package): 11 - 14 %Cohumulone: 25 - 28 %Total oils: 1,2 - 1,6 ml / 100 gStorage stability (alpha acids): Very good Crop: See headingForm: Pellets

€4,2
€4 per piece when you buy 2 or more
Crisp Torrefied Wheat 250g Crushed

Crisp Torrefied Wheat 250g Crushed

Crisp Torrefied Wheat 1kg Crushed. Puffed wheat. Pre-cooked, non-malted cereals provide the brewer with the opportunity for product differentiation. Flaked products can be added directly to the mash without the need for milling.Content: 250g

€1,8
Brewly Red Plastic Pressure Kit

Brewly Red Plastic Pressure Kit

Add this pressure kit to your FermZilla 27L, 35L or 55L and turn your FermZilla into a true uni tank that can be used for carbonating beer.Brewly Pressure Kit includes:- 2 x Plastic Carbonation Screw Caps with barb- 1 x SS Float & 80cm Silicone Dip TubeThis inexpensive upgrade will truly show you what the FermZilla was designed for. Here are some possibilities:Fermenting Under Pressure:First one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commercial beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an adjustable pressure relief valve, or blow tie kit, that allows you to set a lower pressure. It is also always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. Carbonating, Pushing, and Serving:When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an adjustable pressure relief. The idea is that the FermZilla can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a beer line to connect the FermZilla to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator. Lack of OxidationBecause the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock. Key Features:• Ferment beer under pressure to reduce ester and fusel alcohol production• Ability to always draw clear beer with the unique, floating draw tube • Keg already carbonated beer• Use co2 to push beer into a keg or though a filter into a keg• Carbonate and serve beer directly from the FermZilla, eliminating kegging all together.

€25
€19
Friends Company All Citra NEIPA 7% 20L Recipe Kit

Friends Company All Citra NEIPA 7% 20L Recipe Kit

Friends Company All Citra NEIPA 7%A straw hazy, New England style India Pale Ale showcasing the Citra hop, both T90-pellets and Cryo pellets - with smooth flavor of citrus and tropical fruits. A large dose dry hopping gives lovely aroma.  The Recipe Kit contains:- Malt (crushed): Maris Otter, PilsnerFlaked Oats, Wheat- Hops: Citra (T90 & Cryo)- Dry Hopping: Yes- Yeast: Verdant Ale- Clarifying agent: Protafloc- Lactic acid for pH-adjustment- Caps: Black caps are included- Brewing manual and recipe (Grainfather XML-fil is available upon request)Contains barley malt and oats. Ascorbic acid recommended.

€56
Fluidfit HCF5/16-G04G-H - 5/15" Pushfit to 1/2" BSP Thread

Fluidfit HCF5/16-G04G-H - 5/15" Pushfit to 1/2" BSP Thread

Fluidfit® HCF-UNF 5/16" push-fit connection with female 1/2" BSPP thread.

€3,6